SN74LV74AQDRG4Q1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 122.413241mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100, 74LV |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LV74 |
| Function | Set(Preset) and Reset |
| Number of Outputs | 4 |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Clock Frequency | 140MHz |
| Propagation Delay | 20 ns |
| Turn On Delay Time | 9.8 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | AND, D-Type |
| Current - Quiescent (Iq) | 20μA |
| Current - Output High, Low | 12mA 12mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 9.3ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 2pF |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LV74AQDRG4Q1 Overview
The item is packaged in 14-SOIC (0.154, 3.90mm Width)cases. A package named Tape & Reel (TR)includes it. Differentialis the output configured for it. In the configuration of the trigger, Positive Edgeis used. There is an electric part mounted in the way of Surface Mount. A supply voltage of 2V~5.5V is required for operation. It is operating at a temperature of -40°C~125°C TA. It is an electronic flip flop with the type D-Type. In this case, it is a type of FPGA belonging to the Automotive, AEC-Q100, 74LV series. Its output frequency should not exceed 140MHz. Despite external influences, it consumes 20μAof quiescent current. In 14terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. JK flip flop belongs to 74LV74 family. Power is provided by a 2.5V supply. Input capacitance of this device is 2pF farads. In this case, the D flip flop belongs to the LV/LV-A/LVX/Hfamily. There is an electronic part mounted in the way of Surface Mount. The electronic flip flop is designed with pins 14. This device has the clock edge trigger type of Positive Edge. The part you are looking for is included in FF/Latches. In this case, the maximum supply voltage (Vsup) reaches 5.5V. It is imperative that the supply voltage (Vsup) is maintained above 2Vin order to ensure normal operation. In order to achieve its superior flexibility, 2 circuits are used. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TR. In order for the device to operate, it requires 3.3V power supplies. There are no output lines on the JK flip flop.
SN74LV74AQDRG4Q1 Features
Tape & Reel (TR) package
Automotive, AEC-Q100, 74LV series
14 pins
3.3V power supplies
SN74LV74AQDRG4Q1 Applications
There are a lot of Texas Instruments SN74LV74AQDRG4Q1 Flip Flops applications.
- Convert a momentary switch to a toggle switch
- Individual Asynchronous Resets
- Power down protection
- Load Control
- Data Synchronizers
- ESCC
- Cold spare funcion
- Asynchronous counter
- Parallel data storage
- 2 – Bit synchronous counter
