SN74LV74AQPWRQ1
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 57.209338mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100, 74LV |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 14 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LV74 |
| Function | Set(Preset) and Reset |
| Number of Outputs | 4 |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Clock Frequency | 140MHz |
| Propagation Delay | 20 ns |
| Turn On Delay Time | 9.8 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 20μA |
| Current - Output High, Low | 12mA 12mA |
| Max I(ol) | 0.006 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 9.3ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 2pF |
| fmax-Min | 75 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Length | 5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74LV74AQPWRQ1 Overview
As a result, it is packaged as 14-TSSOP (0.173, 4.40mm Width). D flip flop is included in the Tape & Reel (TR)package. This output is configured with Differential. It is configured with a trigger that uses Positive Edge. There is an electronic component mounted in the way of Surface Mount. The supply voltage is set to 2V~5.5V. It is at -40°C~125°C TAdegrees Celsius that the system is operating. It is an electronic flip flop with the type D-Type. It belongs to the Automotive, AEC-Q100, 74LVseries of FPGAs. It should not exceed 140MHzin its output frequency. T flip flop consumes 20μA quiescent energy. In 14terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. Members of the 74LV74family make up this object. It is powered from a supply voltage of 2.5V. This JK flip flop has a 2pFfarad input capacitance. Devices in the LV/LV-A/LVX/Hfamily are electronic devices. Surface Mount mounts this electronic component. With its 14pins, it is designed to work with most electronic flip flops. There is a clock edge trigger type of Positive Edgeon this device. There is a FF/Latchesbase part number assigned to the RS flip flops. As soon as 5.5Vis reached, Vsup reaches its maximum value. Normal operation requires a supply voltage (Vsup) above 2V. Due to its superior flexibility, it uses 2 circuits. This D flip flop is well suited for TR based on its reliable performance. The D latch operates on 3.3V volts.
SN74LV74AQPWRQ1 Features
Tape & Reel (TR) package
Automotive, AEC-Q100, 74LV series
14 pins
3.3V power supplies
SN74LV74AQPWRQ1 Applications
There are a lot of Texas Instruments SN74LV74AQPWRQ1 Flip Flops applications.
- Frequency Divider circuits
- Automotive
- Balanced 24 mA output drivers
- Load Control
- Data transfer
- Asynchronous counter
- Consumer
- Counters
- Cold spare funcion
- ESCC
