SN74LV8154PW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74LV |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | EIGHT OUTPUTS AVAILABLE |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 40MHz |
| Base Part Number | 74LV8154 |
| Pin Count | 20 |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 50 ns |
| Turn On Delay Time | 50 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | Counter |
| Direction | Up |
| Output Characteristics | 3-STATE |
| Logic Type | Binary Counter |
| Number of Bits per Element | 16 |
| Trigger Type | Positive Edge |
| Clock Edge Trigger Type | Positive Edge |
| Count Rate | 25MHz |
| Load/Preset Input | YES |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LV8154PW Overview
In the 20-TSSOP (0.173, 4.40mm Width)package, it is supplied. The configuration of this device is based on 20terminations. By supplying 3.3Vwith a voltage of 3.3V , the device can be operated in a completely flexible manner. The device has 2terminations. The total number of component pins is 20. There is a package in the form of Tube. There are 20 pins going on to connect other parts in the circuit. It is mounted in the way of [0]. In this case, it appears as a member of the family [0]. As a member of 74LV series, it is well suited for various applications. In this case, the logic type is set to [0]. Ideally, the operating temperature should be set to -40°C~85°C. A mounting type of Surface Mountis adopted. Providing a supply voltage of 2V~5.5Vallows it to operate more reliably. The array consists of elements storing 16bits each. It is possible for the result to be yesin Pbfree code. This electronic device is equipped with the following features [0]. More related parts are available under its base part number 74LV8154. From the voltage source, there is a voltage of 3.3V volts. Supply voltages can be as low as 2V volts (Vsup). A frequency of 40MHzis used for operation. Up to 5.5Vis the maximum supply voltage (Vsup).
SN74LV8154PW Features
Embedded in the 20-TSSOP (0.173, 4.40mm Width) package
16 bits per element
EIGHT OUTPUTS AVAILABLE
Frequency of 40MHz
SN74LV8154PW Applications
There are a lot of Texas Instruments SN74LV8154PW Counters & Dividers applications.
- counting/frequency sy nthesizers-BCD output
- Fixed or Programmable Frequency Division
- Frequency dividing circuits
- Time delay circuits
- SQUARING
- DIVISION
- Counter control/timers
- SQUARE ROOT
- Signal gating
- Analog multiplexing and demultiplexing
