SN74LVC112ADG4
| Parameters | |
|---|---|
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 1.8V |
| Frequency | 150MHz |
| Pin Count | 16 |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Power Supplies | 3.3V |
| Temperature Grade | AUTOMOTIVE |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.65V |
| Load Capacitance | 50pF |
| Current - Output | 24mA |
| Number of Bits | 2 |
| Propagation Delay | 7.1 ns |
| Turn On Delay Time | 1 ns |
| Family | LVC/LCX/Z |
| Logic Function | AND, JK-Type |
| Logic IC Type | J-K FLIP-FLOP |
| Prop. Delay@Nom-Sup | 5.9 ns |
| High Level Output Current | -24mA |
| Low Level Output Current | 24mA |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Negative Edge |
| Height | 1.58mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Packing Method | TUBE |
| Technology | CMOS |
| Terminal Position | DUAL |
SN74LVC112ADG4 Overview
The flip flop is packaged in SOIC. In total, it contains 2 elements. A total of 16 terminations have been made. A voltage of 1.8V provides power to the D latch. A device of this type belongs to the family of LVC/LCX/Z. It is mounted by the way of Surface Mount. Basically, it is designed with a set of 16 pins. Its clock edge trigger type is Negative Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. This flip flop is designed with 2 Bits. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TUBE. The D latch operates on 3.3V volts. There are 1 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. In this case, the high level output current is set to -24mA. There is no low level output current set at 24mA. Operating temperatures should be lower than 85°C. Ideally, the operating temperature should be greater than -40°C. The system operates with a minimum supply voltage of 1.65V. In this case, it supports a maximum supply voltage of 3.6V. This frequency can be achieved at 150MHz. This logic IC is J-K FLIP-FLOP. A total of 2 functions are provided by this T flip flop. It has 16 pins. With an output current of 24mA, this flip flop offers maximum design flexibility.
SN74LVC112ADG4 Features
16 pins
2 Bits
3.3V power supplies
2 Functions
16 pin count
SN74LVC112ADG4 Applications
There are a lot of Texas Instruments SN74LVC112ADG4 Flip Flops applications.
- Supports Live Insertion
- Frequency Divider circuits
- Buffer registers
- Count Modes
- Dynamic threshold performance
- 2 – Bit synchronous counter
- Test & Measurement
- Functionally equivalent to the MC10/100EL29
- Single Up Count-Control Line
- Data storage
