SN74LVC138ADBR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Weight | 128.593437mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Decoder/Demultiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Decoder/Drivers |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74LVC138 |
| Pin Count | 16 |
| Number of Outputs | 8 |
| Circuit | 1 x 3:8 |
| Polarity | Inverting |
| Number of Circuits | 1 |
| Load Capacitance | 50pF |
| Power Dissipation | 200mW |
| Number of Bits | 8 |
| Propagation Delay | 22 ns |
| Quiescent Current | 10μA |
| Turn On Delay Time | 22 ns |
| Family | LVC/LCX/Z |
| Logic Function | Decoder, Demultiplexer |
| Number of Inputs | 3 |
| Current - Output High, Low | 24mA 24mA |
| Supply Type | Single |
| Bandwidth | 100MHz |
| Max I(ol) | 0.024 A |
| Prop. Delay@Nom-Sup | 6.7 ns |
| Voltage Supply Source | Single Supply |
| Input Conditioning | STANDARD |
| Height | 2mm |
| Length | 6.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVC138ADBR Overview
In order to save board space, digital switch is located in the 16-SSOP (0.209, 5.30mm Width).It is packaged according to the Tape & Reel (TR) method.Mounting is performed using Surface Mount.the multiplexers uses an analog IC Decoder/Demultiplexer.When the operating temperature is kept at -40°C~85°C, the machine will not be sensturn signal switchive to external influences.The turn signal switch is designed for use with a 1.65V~3.6V supply voltage, which gives it a lot of flexibility.The multiplexers from 74LVC series can be used for a wide range of applications.It is designed with 16 terminations as part of its basic configuration.There is a base part number 74LVC138 that can be used to locate signal switch's related components as well.For multiplexer's system, 1.8V voltage is supplied.In this turn signal switch, there are 16 components that can be connected to each pin.As a result, conductors end at GULL WING.In this case, Single is employed as the supply type.This multiplexer ic has 16 pins configured.It is mounted in the way of Surface Mount.The LVC/LCX/Z family includes the logic switch.Signal multiplexer contains 8 bits.In order for the turn signal switch to work, there are 8 outputs.In electronic terms, the digital switch ic is classified as part number Decoder/Drivers.Despite not interacting with external factors, it consumes 10μA current of multiplexer ic.The multiplexer provides 3 inputs.The switches is packaged according to the way of TR.Normally, the digitalswitch consists of 1 circuits.
SN74LVC138ADBR Features
Supplied in the 16-SSOP (0.209, 5.30mm Width) package
Adopting a supply type of Single
SN74LVC138ADBR Applications
There are a lot of Texas Instruments SN74LVC138ADBR Signal Switches / Multiplexers / Decoders applications.
- Automation system
- Encrypted communications system
- Signal router
- Frequency multiplexing system
- A robotic vehicle with the metal detector
- Textile mills
- Enabling block of memory depending on address in memory chips
- Data-routing applications
- Electronic circuits
- Communication system
