banner_page

SN74LVC138ADBRG4

16 Terminations16 Pin Signal switch1 FunctionsMin 1.65V VMax 3.6V V


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74LVC138ADBRG4
  • Package: SSOP
  • Datasheet: -
  • Stock: 689
  • Description: 16 Terminations16 Pin Signal switch1 FunctionsMin 1.65V VMax 3.6V V(Kg)

Details

Tags

Parameters
Mount Surface Mount
Package / Case SSOP
Number of Pins 16
Weight 128.593437mg
Packaging Tape and Reel
JESD-609 Code e4
Moisture Sensitivity Level (MSL) 1
Number of Terminations 16
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Additional Feature TWO ACTIVE-LOW AND ONE ACTIVE-HIGH ENABLE INPUTS
Subcategory Decoder/Drivers
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 1.8V
Terminal Pitch 0.65mm
Pin Count 16
Number of Elements 1
Polarity Inverting
Temperature Grade INDUSTRIAL
Max Supply Voltage 3.6V
Min Supply Voltage 1.65V
Propagation Delay 22 ns
Quiescent Current 10μA
Turn On Delay Time 22 ns
Family LVC/LCX/Z
Logic Function Decoder, Demultiplexer
Supply Type Single
Bandwidth 100MHz
Logic IC Type OTHER DECODER/DRIVER
Max I(ol) 0.024 A
Prop. Delay@Nom-Sup 6.7 ns
High Level Output Current -24mA
Low Level Output Current 24mA
Number of Input Lines 3
Number of Output Lines 8
Input Conditioning STANDARD
Height 1.95mm
Length 6.2mm
Width 5.3mm
Radiation Hardening No
RoHS Status RoHS Compliant
Lead Free Lead Free

SN74LVC138ADBRG4 Overview


Providing this information in the SSOP enables digital switch board space to be saved.The package is packaged in accordance with Tape and Reel.There is a design for terminating 16 as part of its basic configuration.The multiplexer is supplied with 1.8V voltage.Signal switch has 16 component pins.Conductors terminate at GULL WING in this design.The supply type of this multiplexer ic is Single.Currently, it is configured with a 16 pin configuration.Surface Mount is the way it is mounted.I would like to refer to the logic switch as a member of the LVC/LCX/Z family.Decoder/Drivers is the classification for this the digital switch ic.Without external influences, it consumes 10μA current of multiplexer ic.For the purpose of accepting voltage levels, the multiplexers have 3 input lines.There are 8 output lines designed to serve as the source of the signal.It is acceptable for this signal switch to operate at the maximal temperature of 85°C.It is recommended that a minimum operating temperature of the multiplexer of -40°C be maintained.It is specified that the signal switches should operate at 3.6V as its maximum supply voltage.The digital swith is specified to operate at the minimum supply voltage of 1.65V in compliance with the applicable device specification.Additionally, it improves the characteristics of TWO ACTIVE-LOW AND ONE ACTIVE-HIGH ENABLE INPUTS.Configuration elements for the mux switch consist of 1.It uses IC OTHER DECODER/DRIVER for its logic.

SN74LVC138ADBRG4 Features


Supplied in the SSOP package
Adopting a supply type of Single
3 input lines
8 output lines
TWO ACTIVE-LOW AND ONE ACTIVE-HIGH ENABLE INPUTS
OTHER DECODER/DRIVER as the logic IC

SN74LVC138ADBRG4 Applications


There are a lot of Texas Instruments SN74LVC138ADBRG4 Signal Switches / Multiplexers / Decoders applications.

  • Analog to digital conversion
  • Telephone network
  • Arithmetic Logic Units
  • Speed control of medern motors
  • Steel plants
  • Metal detectors
  • To select different devices in microprocessor input
  • Idle motor
  • A robotic vehicle with the metal detector
  • Data demultiplexing

Write a review

Note: HTML is not translated!
    Bad           Good