SN74LVC139ADG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Decoder/Drivers |
| Packing Method | TUBE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 1.8V |
| Pin Count | 16 |
| Number of Elements | 2 |
| Polarity | Inverting |
| Power Supplies | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.65V |
| Load Capacitance | 50pF |
| Propagation Delay | 20.6 ns |
| Quiescent Current | 10μA |
| Turn On Delay Time | 20.6 ns |
| Family | LVC/LCX/Z |
| Logic Function | Decoder, Demultiplexer |
| Supply Type | Single |
| Bandwidth | 100MHz |
| Logic IC Type | OTHER DECODER/DRIVER |
| High Level Output Current | -24mA |
| Low Level Output Current | 24mA |
| Power Supply Current-Max (ICC) | 0.01mA |
| Number of Output Lines | 4 |
| Input Conditioning | STANDARD |
| Height | 1.58mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74LVC139ADG4 Overview
The reason it is provided is that the board space can be saved by placing digital switch in the SOIC.Among its basic configurations are 16 terminations.The multiplexer's system works with 1.8V voltage.This turn signal switch contains 16 component pins.As the end of conductors, it uses GULL WING.There is a type of supply of Single.Currently, it is configured with a 16 pin configuration.The mount is in Surface Mount.In the LVC/LCX/Z family, the logic switch is included.Normally, 3.3V is powered by a battery.I would classify the digital switch ic as an electronic part belonging to the Decoder/Drivers category.Without the influence of external factors, it consumes 10μA current of multiplexer ic.The switches packaging is based on TUBE.Signal sources consist of output lines of 4.Signal switch operation at 85°C temperature is acceptable.In order to maintain a minimal operating temperature of the multiplexer, it should be set at -40°C.The signal switches is specified to operate at the maximum supply voltage of 3.6V in compliance with the applicable device specification.In compliance with the applicable device specification, the digital swith operates at a minimum supply voltage of 1.65V.There are 2 elements used for the mux switch configuration.The logic IC of the digitalswitch is OTHER DECODER/DRIVER.
SN74LVC139ADG4 Features
Supplied in the SOIC package
Adopting a supply type of Single
Power supplies of 3.3V
4 output lines
OTHER DECODER/DRIVER as the logic IC
SN74LVC139ADG4 Applications
There are a lot of Texas Instruments SN74LVC139ADG4 Signal Switches / Multiplexers / Decoders applications.
- Microprocessor instruction decoding
- High-performance memory systems
- To select different devices in microprocessor input
- PCIe
- Analog to digital conversion
- Make full adder
- Idle motor
- Steel plants
- Seven segment displays
- Analog, digital or video signal switching
