SN74LVC139ADGVR
| Parameters | |
|---|---|
| ECCN Code | EAR99 |
| Type | Decoder/Demultiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Decoder/Drivers |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 1.8V |
| Base Part Number | 74LVC139 |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Number of Elements | 2 |
| Circuit | 1 x 2:4 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 1.65V |
| Load Capacitance | 50pF |
| Number of Bits | 4 |
| Propagation Delay | 6.2 ns |
| Quiescent Current | 10μA |
| Turn On Delay Time | 20.6 ns |
| Family | LVC/LCX/Z |
| Logic Function | Decoder, Demultiplexer |
| Current - Output High, Low | 24mA 24mA |
| Supply Type | Single |
| Bandwidth | 100MHz |
| Power Supply Current-Max (ICC) | 0.01mA |
| Voltage Supply Source | Single Supply |
| Input Conditioning | STANDARD |
| Height | 1.2mm |
| Length | 3.6mm |
| Width | 4.4mm |
| Thickness | 1.05mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 41.900595mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
SN74LVC139ADGVR Overview
In order to conserve board space, digital switch is included in the 16-TFSOP (0.173, 4.40mm Width).In this case, it is packaged as Tape & Reel (TR).Digital switch ic uses a Surface Mount mounting method.the multiplexers uses an analog IC Decoder/Demultiplexer.If the operating temperature is maintained at -40°C~85°C, turn signal switch will not be susceptible to external factors.When digital controlled switch operates at 1.65V~3.6V, designers are provided with a greater degree of flexibility.These multiplexers are members of the 74LVC series, which provide extensive application potential.There are 16 terminations included in its basic configuration.In addition, it also has a base part number of 74LVC139, which can be used to find related parts.For multiplexer's system, 1.8V voltage is supplied.In this turn signal switch, there are 16 components that can be connected to each pin.GULL WING represents the end of conductors.The supply type of this multiplexer ic is Single.The board has 16 pins configured.Multiplexer ics are mounted in the direction of Surface Mount.The logic switch belongs to the family of LVC/LCX/Z.Signal multiplexer consists of 4 bits.Keeping Vsup at 1.65V will prevent some unwanted failures.In order to avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 3.6V.In order for 3.3V to operate normally, a power supply is provided.The turn signal switch has 4 outputs.This is a signal switch that is categorized as Decoder/Drivers.Not being affected by the external factors, consumes 10μA current of multiplexer ic.The switches package is packaged in accordance with the TR method.The mux switch configuration consists of 2 elements.
SN74LVC139ADGVR Features
Supplied in the 16-TFSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 3.3V
SN74LVC139ADGVR Applications
There are a lot of Texas Instruments SN74LVC139ADGVR Signal Switches / Multiplexers / Decoders applications.
- Data collection system
- To select different devices in microprocessor input
- A robotic vehicle with the metal detector
- Seven segment displays
- Enabling block of memory depending on address in memory chips
- Data communication
- RF-based home automation system
- VGA
- Video transmission
- Logic circuits
