SN74LVC139AGQNR
| Parameters | |
|---|---|
| Series | 74LVC |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Decoder/Demultiplexer |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Decoder/Drivers |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74LVC139 |
| Pin Count | 20 |
| Number of Outputs | 4 |
| Number of Elements | 2 |
| Circuit | 1 x 2:4 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 1.65V |
| Power Dissipation | 200mW |
| Number of Bits | 4 |
| Throw Configuration | DP4T |
| Propagation Delay | 6.2 ns |
| Quiescent Current | 10μA |
| Turn On Delay Time | 20.6 ns |
| Family | LVC/LCX/Z |
| Logic Function | Decoder, Demultiplexer, Demux |
| Current - Output High, Low | 24mA 24mA |
| Supply Type | Single |
| Bandwidth | 100MHz |
| Power Supply Current-Max (ICC) | 0.01mA |
| Voltage Supply Source | Single Supply |
| Input Conditioning | STANDARD |
| Height Seated (Max) | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-VFBGA |
| Number of Pins | 20 |
| Weight | 21.687385mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
SN74LVC139AGQNR Overview
In order to conserve board space, digital switch is included in the 20-VFBGA.As a result, it is packaged in a way that is referred to as Cut Tape (CT).Digital switch ic uses a Surface Mount mounting method.The analog IC used in the multiplexers can be referred to as Decoder/Demultiplexer.A temperature of -40°C~85°C will not leave the turn signal swturn signal switchch susceptible to external influences.Using a 1.65V~3.6V supply voltage provides digital controlled switch's superior flexibility for designers.In addition to being a member of the 74LVC series, these multiplexers have a wide range of applications.As part of its basic configuration, 20 terminations are designed as a part of it.The part number for 74LVC139 can be used to find its logic switch related parts as well.The voltage supplied for multiplexer's system is 1.8V.multiplexer's systemThis turn signal switch has a total of 20 component pins.Conductors terminate at BALL in this design.The supply type of this multiplexer ic is Single.This multiplexer ic is configured with 20 pins.As you can see, it is mounted in the direction of Surface Mount.I would like to refer to the logic switch as a member of the LVC/LCX/Z family.In this signal multiplexer, there are 4 bits provided.Keeping the minimum supply voltage (Vsup) at 1.65V prevents some unnecessary failures.It is advisable to keep the maximum supply voltage (Vsup) at 3.6V so as to avoid some unnecessary failures.It is provided that 3.3V has a power supply in order to function normally.The turn signal switch operates with 4 outputs.Decoder/Drivers is the classification for this the digital switch ic.Without external influences, it consumes 10μA current of multiplexer ic.According to TAPE AND REEL, the switches is packaged.The mux switch configuration consists of 2 elements.
SN74LVC139AGQNR Features
Supplied in the 20-VFBGA package
Adopting a supply type of Single
Power supplies of 3.3V
SN74LVC139AGQNR Applications
There are a lot of Texas Instruments SN74LVC139AGQNR Signal Switches / Multiplexers / Decoders applications.
- To select different task for memory in microprocessor memory systems
- Transmission from the computer system of a satellite
- Memory chips
- Medical industry
- Data-routing applications
- Electronic circuits
- Implementing boolean functions with multiple variables
- D/A converters
- Computer memory
- Audio transmission
