SN74LVC139ANSR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Weight | 200.686274mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Decoder/Demultiplexer |
| Subcategory | Decoder/Drivers |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 1.8V |
| Base Part Number | 74LVC139 |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Number of Elements | 2 |
| Circuit | 1 x 2:4 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 1.65V |
| Load Capacitance | 50pF |
| Number of Bits | 4 |
| Propagation Delay | 6.2 ns |
| Quiescent Current | 10μA |
| Turn On Delay Time | 20.6 ns |
| Family | LVC/LCX/Z |
| Logic Function | Decoder, Demultiplexer |
| Current - Output High, Low | 24mA 24mA |
| Supply Type | Single |
| Bandwidth | 100MHz |
| Power Supply Current-Max (ICC) | 0.01mA |
| Voltage Supply Source | Single Supply |
| Input Conditioning | STANDARD |
| Height | 2mm |
| Length | 10.3mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVC139ANSR Overview
For the purpose of saving board space, digital switch is included in the 16-SOIC (0.209, 5.30mm Width).As a result, it is packaged in a way that is referred to as Tape & Reel (TR).In terms of mounting, digital switch ic uses the method of Surface Mount.the multiplexers uses IC Decoder/Demultiplexer as the analog IC.When the operating temperature is kept at -40°C~85°C, turn signal switch will not be susceptible to external factors.The turn signal switch is designed for use with a 1.65V~3.6V supply voltage, which gives it a lot of flexibility.Multiplexers of the 74LVC series can be used in a wide range of applications.As parts of its basic configuration, 16 terminations are desgined.The base part number is 74LVC139, so you can find its logic switch related parts using that number.The multiplexer's system is powered by 1.8V volts.In this turn signal switch, there are 16 component pins.GULL WING represents the end of conductors.In this case, Single is employed as the supply type.This multiplexer ic has 16 pins configured.It is mounted in the way of Surface Mount.There is a family of LVC/LCX/Z members.Signal multiplexer provides 4 bits.The minimal supply voltage (Vsup) should be kept at 1.65V to avoid some unnecessary failures.It is advisable that the maximal supply voltage (Vsup) remains at 3.6V to avoid some unnecessary failures.For mux switch's normal operation, power supply 3.3V is provided.The turn signal switch has 4 outputs designed for operation.Decoder/Drivers is a category for the digital switch ics.There are no external influences on this multiplexer ic, so it consumes 10μA current.The switches package is packaged in accordance with TR.The mux switch configuration consists of 2 elements.
SN74LVC139ANSR Features
Supplied in the 16-SOIC (0.209, 5.30mm Width) package
Adopting a supply type of Single
Power supplies of 3.3V
SN74LVC139ANSR Applications
There are a lot of Texas Instruments SN74LVC139ANSR Signal Switches / Multiplexers / Decoders applications.
- HD surveillance system
- Home automation system
- Data communication
- Paper plants
- Idle motor
- Code converters
- Data-routing applications
- Data bus control
- Small scale TV wall
- D/A converters
