SN74LVC139APWG4
| Parameters | |
|---|---|
| Supply Voltage-Min (Vsup) | 1.65V |
| Load Capacitance | 50pF |
| Number of Bits | 4 |
| Propagation Delay | 6.2 ns |
| Quiescent Current | 10μA |
| Turn On Delay Time | 20.6 ns |
| Family | LVC/LCX/Z |
| Logic Function | Decoder, Demultiplexer |
| Current - Output High, Low | 24mA 24mA |
| Supply Type | Single |
| Bandwidth | 100MHz |
| Power Supply Current-Max (ICC) | 0.01mA |
| Voltage Supply Source | Single Supply |
| Input Conditioning | STANDARD |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Decoder/Demultiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Decoder/Drivers |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 1.8V |
| Base Part Number | 74LVC139 |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Number of Elements | 2 |
| Circuit | 1 x 2:4 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
SN74LVC139APWG4 Overview
Due to the fact that it is provided in the 16-TSSOP (0.173, 4.40mm Width), digital switch allows the board to be compacted.As a result, it is packaged in a way that is referred to as Tube.The method digital switch ic adopts for mounting is Surface Mount.As the analog part, the circuit uses an analog IC Decoder/Demultiplexer.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.Design engineers have more flexibility when digital controlled switch operates at 1.65V~3.6V voltage.Multiplexers in the 74LVC series are suitable for a wide range of applications.There is a design for terminating 16 as part of its basic configuration.The base part number is 74LVC139, which is also useful when looking up signal switch's related components.In this case, 1.8V is the voltage supplied to the multiplexer's system.Signal switch has 16 component pins.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.Single is used as its supply type.A configuration of 16 pins is used.The mounting is in the way of Surface Mount.The logic switch is included into the family of LVC/LCX/Z.In this signal multiplexer, there are 4 bits provided.To avoid unnecessary failures, keep the supply voltage at 1.65V (Vsup).In order to avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 3.6V.In order for 3.3V to operate normally, a power supply is provided.There are 4 outputs designed for the operation of the turn signal switch.This is a signal switch that is categorized as Decoder/Drivers.No external influence consumes 10μA current of multiplexer ic.Configuration elements for the mux switch consist of 2.
SN74LVC139APWG4 Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 3.3V
SN74LVC139APWG4 Applications
There are a lot of Texas Instruments SN74LVC139APWG4 Signal Switches / Multiplexers / Decoders applications.
- Robotic vehicles
- Seven segment displays
- Logic circuits
- Electronically controlled engine system
- Telephone network
- Automatic Monitoring systems
- A/D converters
- HD surveillance system
- Recording transmission
- Control unit of Central Processing unit (CPU)
