SN74LVC139APWR

16 Terminations1.65V~3.6V 16 Pin 74LVC139 Signal switch74LVC Series 4 Outputs2 Functions

Manufacturer: Texas Instruments
Nocochips NO: 815-SN74LVC139APWR
Package: 16-TSSOP (0.173, 4.40mm Width)
Datasheet: -
Stock: 488
Description: 16 Terminations1.65V~3.6V 16 Pin 74LVC139 Signal switch74LVC Series 4 Outputs2 Functions(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 6 days ago)
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Number of Pins	16
Weight	61.887009mg
Operating Temperature	-40°C~85°C
Packaging	Tape & Reel (TR)
Series	74LVC
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Type	Decoder/Demultiplexer
Terminal Finish	Matte Tin (Sn)
Subcategory	Decoder/Drivers
Packing Method	TR
Technology	CMOS
Voltage - Supply	1.65V~3.6V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	1.8V
Base Part Number	74LVC139
Pin Count	16
Number of Outputs	4
Circuit	1 x 2:4
Polarity	Inverting
Supply Voltage-Max (Vsup)	3.6V
Power Supplies	3.3V
Supply Voltage-Min (Vsup)	1.65V
Number of Circuits	2
Load Capacitance	50pF
Power Dissipation	200mW
Number of Bits	4
Throw Configuration	DP4T
Propagation Delay	6.2 ns
Quiescent Current	10μA
Turn On Delay Time	20.6 ns
Family	LVC/LCX/Z
Logic Function	Decoder, Demultiplexer
Current - Output High, Low	24mA 24mA
Supply Type	Single
Bandwidth	100MHz
Power Supply Current-Max (ICC)	0.01mA
Voltage Supply Source	Single Supply
Input Conditioning	STANDARD
Height	1.2mm
Length	5mm
Width	4.4mm
Thickness	1mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

SN74LVC139APWR Overview

This is a relatively small item of digital switch that is included in the 16-TSSOP (0.173, 4.40mm Width) in order to save space on the board.As a result, it is packaged in the way of Tape & Reel (TR).In terms of mounting, digital switch ic uses the Surface Mount method .A digital IC Decoder/Demultiplexer is used as the analog component of the multiplexers.If the operating temperature is maintained at -40°C~85°C, turn signal switch will not be susceptible to external factors.The turn signal switch is designed for use with a 1.65V~3.6V supply voltage, which gives it a lot of flexibility.Since they are members of the 74LVC series, they can be used in a wide variety of applications.Its basic configuration includes terminations in the 16 range.There is a base part number 74LVC139 that can be used to locate signal switch's related components as well.In this case, 1.8V is the voltage supplied to the multiplexer's system.There are 16 component pins in this turn signal switch.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.Single is employed as its supply type.This multiplexer ic is configured with 16 pins.The mount is in Surface Mount.I would like to refer to the logic switch as a member of the LVC/LCX/Z family.As a result, signal multiplexer provides 4 bits.In order to prevent unnecessary failures, it is recommended that the minimal supply voltage (Vsup) be kept at 1.65V.The maximal supply voltage (Vsup) should be kept at 3.6V to avoid some unnecessary failures.During mux switch's normal operation, 3.3V is provided with a power supply.As a result, the turn signal switch consists of 4 outputs.The digital switch ic is a part of an electronic system classified as Decoder/Drivers.Not being affected by the external factors, consumes 10μA current of multiplexer ic.TR is used to package the switches.In order for the digitalswitch to function normally, it has 2 circuits.