SN74LVC139ARGYR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-VFQFN Exposed Pad |
| Number of Pins | 16 |
| Weight | 37.194574mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Decoder/Demultiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Decoder/Drivers |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74LVC139 |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Circuit | 1 x 2:4 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 1.65V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Power Dissipation | 200mW |
| Number of Bits | 4 |
| Throw Configuration | DP4T |
| Propagation Delay | 20.6 ns |
| Quiescent Current | 10μA |
| Turn On Delay Time | 20.6 ns |
| Family | LVC/LCX/Z |
| Logic Function | Decoder, Demultiplexer |
| Current - Output High, Low | 24mA 24mA |
| Supply Type | Single |
| Bandwidth | 100MHz |
| Power Supply Current-Max (ICC) | 0.01mA |
| Voltage Supply Source | Single Supply |
| Input Conditioning | STANDARD |
| Height | 1mm |
| Length | 4mm |
| Width | 3.5mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVC139ARGYR Overview
This is a relatively small item of digital switch that is included in the 16-VFQFN Exposed Pad in order to save space on the board.It is packaged according to the Cut Tape (CT) method.digital switch ic uses the method of Surface Mount for mounting.As the analog part, the circuit uses an analog IC Decoder/Demultiplexer.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.When digital controlled switch operates at 1.65V~3.6V, designers are provided with a greater degree of flexibility.Multiplexers in the 74LVC series are suitable for a wide range of applications.This configuration includes 16 terminations as part of its basic functionality.The base part number is 74LVC139, so you can find its logic switch related parts using that number.The multiplexer's system works with 1.8V voltage.In this turn signal switch, there are 16 component pins.There is a type of supply Single that is employed in this case.This multiplexer ic has 16 pins configured.The mount is in Surface Mount.The logic switch is a member of the LVC/LCX/Z family.Signal multiplexer contains 4 bits.The minimal supply voltage (Vsup) should be kept at 1.65V to avoid some unnecessary failures.Avoid unnecessary failures by keeping Vsup at 3.6V.mux switch's normal operation requires the power supply of 3.3V.As part of the operation of this turn signal switch, there are 4 outputs.This is a signal switch that is categorized as Decoder/Drivers.There are no external influences on this multiplexer ic, so it consumes 10μA current.TR is used to package the switches.A normal operation of the digitalswitch requires 2 circuits.
SN74LVC139ARGYR Features
Supplied in the 16-VFQFN Exposed Pad package
Adopting a supply type of Single
Power supplies of 3.3V
SN74LVC139ARGYR Applications
There are a lot of Texas Instruments SN74LVC139ARGYR Signal Switches / Multiplexers / Decoders applications.
- Idle motor
- Automatic health monitoring systems
- Code conversion
- Automation system
- Data communication
- Code converters
- Enabling different functions units in microprocessor instruction decoding
- Microprocessor memory systems
- Combinational circuit
- CNC machines
