SN74LVC157ADR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74LVC |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multiplexer |
| Terminal Finish | Matte Tin (Sn) |
| Packing Method | TR |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Voltage - Supply | 2V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 1.8V |
| Base Part Number | 74LVC157 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Circuit | 4 x 2:1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Number of Channels | 4 |
| Load Capacitance | 50pF |
| Power Dissipation | 500mW |
| Number of Bits | 2 |
| Throw Configuration | DPST |
| Propagation Delay | 8.1 ns |
| Family | LVC/LCX/Z |
| Number of Inputs | 8 |
| Current - Output High, Low | 24mA 24mA |
| Supply Type | Single |
| Bandwidth | 100MHz |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVC157ADR Overview
It is included in the 16-SOIC (0.154, 3.90mm Width) in order to save board space.The package is packaged in accordance with Cut Tape (CT).In terms of mounting, digital switch ic uses the Surface Mount method .The analog IC used in the multiplexers can be referred to as Multiplexer.A temperature of -40°C~85°C will not leave the turn signal swturn signal switchch susceptible to external influences.The turn signal switch is designed for use with a 2V~3.6V supply voltage, which gives it a lot of flexibility.The multiplexers can be used for a wide range of applications since they are members of 74LVC series.There is a design for terminating 16 as part of its basic configuration.The base part number is 74LVC157, which is also useful when looking up signal switch's related components.For multiplexer's system, a voltage of 1.8V is supplied.A component pin count of 16 can be found on this turn signal switch.It employs GULL WING as the point at which conductors come to an end.There is a type of supply Single that is employed in this case.It is configured with 16 pins.The mounting is in the way of Surface Mount.The LVC/LCX/Z family includes the logic switch.The multiplexer ic provides 2 bits.It is advisable to keep the maximum supply voltage (Vsup) at 3.6V so as to avoid some unnecessary failures.Normally, 3.3V is powered by a battery.For the turn signal switch's operation, there are 1 outputs.It has 8 inputs.The switches is packaged according to the way of TR.There are a total of 4 channels used for transmitting data in the turn signal switch's circuit.
SN74LVC157ADR Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 3.3V
SN74LVC157ADR Applications
There are a lot of Texas Instruments SN74LVC157ADR Signal Switches / Multiplexers / Decoders applications.
- Microprocessor input/output systems
- Electronically controlled engine system
- Steel plants
- Frequency multiplexing system
- Injectors
- Video transmission
- Time division multiplexing system
- Robotic vehicles
- Control unit of Central Processing unit (CPU)
- War field flying robot with a night vision flying camera
