SN74LVC157ADRE4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Multiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 1.8V |
| Base Part Number | 74LVC157 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Circuit | 4 x 2:1 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Number of Channels | 4 |
| Load Capacitance | 50pF |
| Power Dissipation | 500mW |
| Number of Bits | 2 |
| Propagation Delay | 8.1 ns |
| Family | LVC/LCX/Z |
| Number of Inputs | 8 |
| Current - Output High, Low | 24mA 24mA |
| Supply Type | Single |
| Bandwidth | 100MHz |
| Output Polarity | TRUE |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVC157ADRE4 Overview
For the purpose of saving board space, digital switch is included in the 16-SOIC (0.154, 3.90mm Width).In this case, it is packaged as Tape & Reel (TR).In terms of mounting, digital switch ic uses the Surface Mount method .The multiplexers uses an analog IC Multiplexer as the analog part of the circuit.A temperature of -40°C~85°C will not leave the turn signal swturn signal switchch susceptible to external influences.Designers have greater flexibility when digital controlled switch operates at a 2V~3.6V supply voltage.Since they are members of the 74LVC series, they can be used in a wide variety of applications.There is a design for terminating 16 as part of its basic configuration.In addition, it also has a base part number of 74LVC157, which can be used to find related parts.The multiplexer is supplied with 1.8V voltage.Signal switch has 16 component pins.GULL WING is used as the point at which the conductors come to an end as part of this formula.There is a supply type of Single employed as part of this supply.A total of 16 pins are configured on this board.This unit is mounted in the way of Surface Mount.I would like to refer to the logic switch as a member of the LVC/LCX/Z family.Signal multiplexer contains 2 bits.It is advisable to keep the maximum supply voltage (Vsup) at 3.6V so as to avoid some unnecessary failures.During mux switch's normal operation, 3.3V is provided with a power supply.As a result, the turn signal switch consists of 1 outputs.This multiplexer is equipped with 8 inputs and 8 outputs.The switches is packaged according to the way of TR.A total of 4 transmission channels are available in the turn signal switch's circuit.
SN74LVC157ADRE4 Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 3.3V
SN74LVC157ADRE4 Applications
There are a lot of Texas Instruments SN74LVC157ADRE4 Signal Switches / Multiplexers / Decoders applications.
- Logic circuits
- Idle motor
- Electronics industry
- Data communication
- Automatic Monitoring systems
- Recording transmission
- Data distribution
- Arithmetic Logic Units
- A/D converters
- Enabling different rows of memory depending on address in memory chips
