SN74LVC157ADRG3
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LVC |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Multiplexer |
| Terminal Finish | Matte Tin (Sn) |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 1.8V |
| Base Part Number | 74LVC157 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Circuit | 4 x 2:1 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Number of Channels | 4 |
| Load Capacitance | 50pF |
| Power Dissipation | 500mW |
| Number of Bits | 2 |
| Propagation Delay | 8.1 ns |
| Family | LVC/LCX/Z |
| Number of Inputs | 8 |
| Current - Output High, Low | 24mA 24mA |
| Supply Type | Single |
| Bandwidth | 100MHz |
| Output Polarity | TRUE |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVC157ADRG3 Overview
Providing this information in the 16-SOIC (0.154, 3.90mm Width) enables digital switch board space to be saved.As a result, it is packaged in a way that is referred to as Tape & Reel (TR).For mounting, digital switch ic uses the method Surface Mount.The analog IC in the multiplexers is identified as Multiplexer.In the case of -40°C~85°C, turn signal switch will not be affected by external factors.A supply voltage of 2V~3.6V provides digital controlled switch's superior flexibility for designers.The multiplexers can be used for a wide range of applications since they are members of 74LVC series.Among its basic configurations are 16 terminations.There is a base part number 74LVC157 that can be used to locate signal switch's related components as well.The multiplexer's system is supplied with a voltage of 1.8V.This turn signal switch contains 16 component pins.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.There is a type of supply Single that is employed in this case.This multiplexer ic is configured with 16 pins.As you can see, it is mounted in the direction of Surface Mount.I would like to refer to the logic switch as a member of the LVC/LCX/Z family.In this signal multiplexer, there are 2 bits that are provided.To avoid some unnecessary failures, the maximum supply voltage (Vsup) should be kept at 3.6V.The power supply of 3.3V is provided for mux switch's normal operation.In order for the turn signal switch to work, there are 1 outputs.In this multiplexer, there is a total of 8 inputs.According to TR, the switches is packaged.The turn signal switch's circuit consists of 4 channels that are being used for transmission in the circuit.
SN74LVC157ADRG3 Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 3.3V
SN74LVC157ADRG3 Applications
There are a lot of Texas Instruments SN74LVC157ADRG3 Signal Switches / Multiplexers / Decoders applications.
- Medical industry
- Night vision cameras
- Make full adder
- Speed synchronization of multiple motors in industries
- Logic gates for other digital devices
- Textile mills
- HDMI applications
- Memory system of computers
- To select different task for memory in microprocessor memory systems
- Audio transmission
