SN74LVC157ANSRE4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Weight | 200.686274mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Multiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 1.8V |
| Base Part Number | 74LVC157 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Circuit | 4 x 2:1 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Number of Channels | 4 |
| Load Capacitance | 50pF |
| Power Dissipation | 500mW |
| Number of Bits | 2 |
| Propagation Delay | 8.1 ns |
| Family | LVC/LCX/Z |
| Number of Inputs | 8 |
| Current - Output High, Low | 24mA 24mA |
| Supply Type | Single |
| Bandwidth | 100MHz |
| Output Polarity | TRUE |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 2mm |
| Length | 10.3mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVC157ANSRE4 Overview
As a means of saving space, digital switch is provided in the 16-SOIC (0.209, 5.30mm Width).Tape & Reel (TR) represents its packaging.For mounting, digital switch ic uses the method Surface Mount.A digital IC Multiplexer is used as the analog component of the multiplexers.The operating temperature of -40°C~85°C will not be susceptible to external factors.Designers have greater flexibility when digital controlled switch operates at a 2V~3.6V supply voltage.As a member of 74LVC series, the multiplexers can be used for a wide range of applications.This configuration includes 16 terminations as part of its basic functionality.There is a base part number of 74LVC157 which can also be used in order to locate the logic switch that are related to this item.In multiplexer's system, 1.8V is the voltage supplied.This turn signal switch contains 16 component pins.GULL WING represents the end of conductors.As a type of supply, Single is employed.Currently, it is configured with 16 pins.The mount is in Surface Mount.The logic switch is a member of the LVC/LCX/Z family.There are 2 bits in signal multiplexer.It is advisable that the maximal supply voltage (Vsup) remains at 3.6V to avoid some unnecessary failures.For mux switch's normal operation, there is a power supply provided at 3.3V.As part of the operation of this turn signal switch, there are 1 outputs.In this multiplexer, there is a total of 8 inputs.According to TR, the switches is packaged.Transmission is carried out over 4 channels in the turn signal switch's circuit.
SN74LVC157ANSRE4 Features
Supplied in the 16-SOIC (0.209, 5.30mm Width) package
Adopting a supply type of Single
Power supplies of 3.3V
SN74LVC157ANSRE4 Applications
There are a lot of Texas Instruments SN74LVC157ANSRE4 Signal Switches / Multiplexers / Decoders applications.
- Enabling block of memory depending on address in memory chips
- Decimal decoder
- High-performance memory-decoding applications
- Make full adder
- To select different devices in microprocessor input
- Memory system of computers
- D/A converters
- RF-based home automation system
- Home automation system
- VGA
