SN74LVC157APWE4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Voltage - Supply | 2V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 1.8V |
| Base Part Number | 74LVC157 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Circuit | 4 x 2:1 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Number of Channels | 4 |
| Load Capacitance | 50pF |
| Power Dissipation | 500mW |
| Number of Bits | 2 |
| Propagation Delay | 8.1 ns |
| Family | LVC/LCX/Z |
| Number of Inputs | 8 |
| Current - Output High, Low | 24mA 24mA |
| Supply Type | Single |
| Bandwidth | 100MHz |
| Output Polarity | TRUE |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVC157APWE4 Overview
In order to save board space, digital switch is located in the 16-TSSOP (0.173, 4.40mm Width).Tube represents its packaging.Digital switch ic adheres to a mounting method of Surface Mount.In the multiplexers, the analog IC is indicated by Multiplexer.A temperature of -40°C~85°C will not leave the turn signal swturn signal switchch susceptible to external influences.The turn signal switch is designed for use with a 2V~3.6V supply voltage, which gives it a lot of flexibility.Multiplexers in the 74LVC series are suitable for a wide range of applications.Among its basic features are 16 terminations.To find signal switch's related components, a base part number of 74LVC157 may also be used.In this case, 1.8V is the voltage supplied to the multiplexer's system.In this turn signal switch, there are 16 component pins.It employs GULL WING as the point at which conductors come to an end.Single is employed as its supply type.Currently, it is configured with a 16 pin configuration.Multiplexer ics are mounted in the direction of Surface Mount.The logic switch is a member of the LVC/LCX/Z family.In the signal multiplexer, there are 2 bits available.To avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 3.6V.In order to maintain mux switch's normal operation, power is provided to 3.3V.For the turn signal switch's operation, there are 1 outputs.This multiplexer provides 8 inputs.This turn signal switch's circuit is based on a circuit with 4 channels.
SN74LVC157APWE4 Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 3.3V
SN74LVC157APWE4 Applications
There are a lot of Texas Instruments SN74LVC157APWE4 Signal Switches / Multiplexers / Decoders applications.
- Electronically controlled engine system
- Analog to digital conversion
- Speed synchronization of multiple motors in industries
- Night vision cameras
- Code conversion
- Data bus control
- Make half adder
- Electronic circuits
- Computer memory
- Injectors
