SN74LVC157APWG4
| Parameters | |
|---|---|
| Independent Circuits | 1 |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Voltage - Supply | 2V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 1.8V |
| Base Part Number | 74LVC157 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Circuit | 4 x 2:1 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Number of Channels | 4 |
| Load Capacitance | 50pF |
| Power Dissipation | 500mW |
| Number of Bits | 2 |
| Propagation Delay | 8.1 ns |
| Family | LVC/LCX/Z |
| Number of Inputs | 8 |
| Current - Output High, Low | 24mA 24mA |
| Supply Type | Single |
| Bandwidth | 100MHz |
| Output Polarity | TRUE |
| Voltage Supply Source | Single Supply |
SN74LVC157APWG4 Overview
Due to the lack of space on the board, digital switch is provided in the 16-TSSOP (0.173, 4.40mm Width).Tube is the method used for packaging.The method digital switch ic adopts for mounting is Surface Mount.The analog IC in the multiplexers is identified as Multiplexer.In the case of -40°C~85°C, turn signal switch will not be affected by external factors.Designers have greater flexibility using digital controlled switch when it works with 2V~3.6V voltage.In addition to being a member of the 74LVC series, these multiplexers have a wide range of applications.Its basic configuration includes terminations in the 16 range.In addition, it also has a base part number of 74LVC157, which can be used to find related parts.The turn signal switch is supplied with a voltage of 1.8V volts.Currently, this turn signal switch has a total of 16 component pins.Conductors terminate at GULL WING in this design.There is a type of supply Single that is employed in this case.This multiplexer ic has 16 pins configured.This unit is mounted in the way of Surface Mount.The logic switch is a member of the LVC/LCX/Z family.In the signal multiplexer, there are 2 bits available.It is advisable that the maximal supply voltage (Vsup) remains at 3.6V to avoid some unnecessary failures.Normally, 3.3V is powered by a battery.For the turn signal switch's operation, there are 1 outputs.This multiplexer has a total of 8 inputs.A total of 4 channels are used for transmission in the turn signal switch's circuit.
SN74LVC157APWG4 Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 3.3V
SN74LVC157APWG4 Applications
There are a lot of Texas Instruments SN74LVC157APWG4 Signal Switches / Multiplexers / Decoders applications.
- Video transmission
- High-performance memory systems
- Enabling different functions units in microprocessor instruction decoding
- Home automation system
- CPU memory location identification
- HDMI applications
- Frequency multiplexing system
- Logic gates for other digital devices
- Make half adder
- Solenoid cooling fan
