SN74LVC157APWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74LVC |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multiplexer |
| Terminal Finish | Matte Tin (Sn) |
| Packing Method | TR |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Voltage - Supply | 2V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 1.8V |
| Base Part Number | 74LVC157 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Circuit | 4 x 2:1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Number of Channels | 4 |
| Load Capacitance | 50pF |
| Power Dissipation | 200mW |
| Number of Bits | 2 |
| Throw Configuration | DPST |
| Propagation Delay | 8.1 ns |
| Family | LVC/LCX/Z |
| Number of Inputs | 8 |
| Current - Output High, Low | 24mA 24mA |
| Supply Type | Single |
| Bandwidth | 100MHz |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVC157APWR Overview
Digital switch is provided in the 16-TSSOP (0.173, 4.40mm Width) for the purpose of saving board space.Cut Tape (CT) is the method used for packaging.Digital switch ic uses a Surface Mount mounting method.For the analog part of the multiplexers, an IC Multiplexer is used.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.Using a 2V~3.6V supply voltage provides digital controlled switch's superior flexibility for designers.Multiplexers of the 74LVC series can be used in a wide range of applications.Among its basic configurations are 16 terminations.The part number for 74LVC157 can be used to find its logic switch related parts as well.The voltage supplied for multiplexer's system is 1.8V.multiplexer's systemThere are 16 component pins in this turn signal switch.At the end of a conductor, it uses GULL WING as the point where the conductor ends.Single is used as its supply type.There are 16 pins on it.This unit is mounted in the way of Surface Mount.Among the family of LVC/LCX/Z the logic switch is a member.There are 2 bits signal multiplexer provides.The maximal supply voltage (Vsup) should be kept at 3.6V to avoid some unnecessary failures.In order for 3.3V to operate normally, a power supply is provided.The turn signal switch has 1 outputs designed for operation.This multiplexer has a total of 8 inputs.According to TR, the switches is packaged.A total of 4 transmission channels are available in the turn signal switch's circuit.
SN74LVC157APWR Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 3.3V
SN74LVC157APWR Applications
There are a lot of Texas Instruments SN74LVC157APWR Signal Switches / Multiplexers / Decoders applications.
- LVDS
- Combinational circuit
- Home automation system
- Relay
- PCIe
- High-performance memory systems
- Recording transmission
- Analog to digital conversion
- Small scale TV wall
- Medium scale TV wall
