Parameters |
Load Capacitance |
50pF |
Power Dissipation |
500mW |
Number of Bits |
2 |
Propagation Delay |
8.1 ns |
Family |
LVC/LCX/Z |
Number of Inputs |
8 |
Current - Output High, Low |
24mA 24mA |
Supply Type |
Single |
Bandwidth |
100MHz |
Output Polarity |
TRUE |
Voltage Supply Source |
Single Supply |
Independent Circuits |
1 |
Height |
1.2mm |
Length |
5mm |
Width |
4.4mm |
Thickness |
1mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 week ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
16 |
Weight |
61.887009mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Series |
74LVC |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
Termination |
SMD/SMT |
ECCN Code |
EAR99 |
Type |
Multiplexer |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Packing Method |
TR |
Technology |
CMOS |
Voltage - Supply |
2V~3.6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
1.8V |
Base Part Number |
74LVC157 |
Pin Count |
16 |
Number of Outputs |
1 |
Max Output Current |
24mA |
Circuit |
4 x 2:1 |
Supply Voltage-Max (Vsup) |
3.6V |
Power Supplies |
3.3V |
Number of Channels |
4 |
SN74LVC157APWRE4 Overview
This is a relatively small item of digital switch that is included in the 16-TSSOP (0.173, 4.40mm Width) in order to save space on the board.The package is packaged in accordance with Tape & Reel (TR).Digital switch ic adheres to a mounting method of Surface Mount.The multiplexers uses an analog IC Multiplexer as the analog part of the circuit.The operating temperature of -40°C~85°C will not be susceptible to external factors.Designers have greater flexibility using digital controlled switch when it works with 2V~3.6V voltage.Multiplexers from the 74LVC series can be used in a wide range of applications.Its basic configuration includes terminations in the 16 range.There is a base part number 74LVC157 that can be used to locate signal switch's related components as well.The multiplexer's system is supplied with a voltage of 1.8V.This turn signal switch consists of 16 component pins.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.This supply type employs Single.The board has 16 pins configured.The mount is in Surface Mount.In the LVC/LCX/Z family, the logic switch is included.Signal multiplexer contains 2 bits.To avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 3.6V.In order to maintain mux switch's normal operation, power is provided to 3.3V.There are 1 outputs designed for the operation of the turn signal switch.This multiplexer is equipped with 8 inputs and 8 outputs.The switches package is packaged in accordance with the TR method.A total of 4 channels are used for transmission in the turn signal switch's circuit.
SN74LVC157APWRE4 Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 3.3V
SN74LVC157APWRE4 Applications
There are a lot of Texas Instruments SN74LVC157APWRE4 Signal Switches / Multiplexers / Decoders applications.
- Electronics industry
- To select different devices in microprocessor output
- Data demultiplexing
- Image transmission
- Make full adder
- Solenoid cooling fan
- CPU memory location identification
- High-performance memory-decoding applications
- Enabling different rows of memory depending on address in memory chips
- Computer memory