SN74LVC157APWT
| Parameters | |
|---|---|
| Power Supplies | 3.3V |
| Number of Channels | 4 |
| Load Capacitance | 50pF |
| Power Dissipation | 500mW |
| Number of Bits | 2 |
| Propagation Delay | 8.1 ns |
| Family | LVC/LCX/Z |
| Number of Inputs | 8 |
| Current - Output High, Low | 24mA 24mA |
| Supply Type | Single |
| Bandwidth | 100MHz |
| Output Polarity | TRUE |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Multiplexer |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 1.8V |
| Base Part Number | 74LVC157 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Circuit | 4 x 2:1 |
| Supply Voltage-Max (Vsup) | 3.6V |
SN74LVC157APWT Overview
In order to conserve board space, digital switch is included in the 16-TSSOP (0.173, 4.40mm Width).As a result, it is packaged in a way that is referred to as Tape & Reel (TR).Digital switch ic adheres to a mounting method of Surface Mount.As the analog part, the circuit uses an analog IC Multiplexer.In the case of -40°C~85°C, turn signal switch will not be affected by external factors.Design engineers have more flexibility when digital controlled switch operates at 2V~3.6V voltage.Multiplexers of the 74LVC series can be used in a wide range of applications.This configuration includes 16 terminations as part of its basic functionality.To find signal switch's related components, a base part number of 74LVC157 may also be used.The multiplexer is supplied with 1.8V voltage.Currently, this turn signal switch has a total of 16 component pins.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.As a type of supply, Single is employed.A total of 16 pins are configured on this board.The mount is in Surface Mount.The logic switch belongs to the family of LVC/LCX/Z.In the signal multiplexer, there are 2 bits available.To avoid some unnecessary failures, the maximum supply voltage (Vsup) should be kept at 3.6V.Normally, 3.3V is powered by a battery.The turn signal switch contains 1 outputs designed to operate.A multiplexer such as this has 8 inputs available.A TR packaging method is used in the switches.There are a total of 4 channels used for transmitting data in the turn signal switch's circuit.
SN74LVC157APWT Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 3.3V
SN74LVC157APWT Applications
There are a lot of Texas Instruments SN74LVC157APWT Signal Switches / Multiplexers / Decoders applications.
- Speed synchronization of multiple motors in industries
- PCIe
- Textile mills
- HD surveillance system
- Combinational circuit
- Idle motor
- Logic circuits
- High-performance memory systems
- Enabling block of memory depending on address in memory chips
- Medical industry
