SN74LVC157AQDREP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 2.7V |
| Base Part Number | 74LVC157 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Circuit | 4 x 2:1 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 4 |
| Load Capacitance | 50pF |
| Number of Bits | 2 |
| Propagation Delay | 5.4 ns |
| Family | LVC/LCX/Z |
| Logic Function | Multiplexer, Mux |
| Number of Inputs | 8 |
| Current - Output High, Low | 24mA 24mA |
| Supply Type | Single |
| Output Polarity | TRUE |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVC157AQDREP Overview
The reason it is provided is that the board space can be saved by placing digital switch in the 16-SOIC (0.154, 3.90mm Width).Tape & Reel (TR) represents its packaging.For mounting, digital switch ic uses the method Surface Mount.In the multiplexers, the analog IC is indicated by Multiplexer.A temperature of -40°C~125°C will not leave the turn signal swturn signal switchch susceptible to external influences.Designers have greater flexibility using digital controlled switch when it works with 2V~3.6V voltage.Since they are members of the 74LVC series, they can be used in a wide variety of applications.The basic configuration of this system includes 16 terminations.As its base part number is 74LVC157, logic switch can also be used to find its related parts.The multiplexer's system works with 2.7V voltage.Currently, this turn signal switch has a total of 16 component pins.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.In this case, Single is employed as the supply type.There are 16 pins on it.The mount is in Surface Mount.The logic switch is a member of the LVC/LCX/Z family.In this signal multiplexer, there are 2 bits that are provided.Keep Vsup at 2V to avoid unnecessary failures.It is advisable to keep the maximum supply voltage (Vsup) at 3.6V so as to avoid some unnecessary failures.Normally, 3.3V is powered by a battery.The turn signal switch has 1 outputs.This multiplexer provides 8 inputs.According to TR, the switches is packaged.In the turn signal switch's circuit, there are 4 channels used for transmission.
SN74LVC157AQDREP Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 3.3V
SN74LVC157AQDREP Applications
There are a lot of Texas Instruments SN74LVC157AQDREP Signal Switches / Multiplexers / Decoders applications.
- Microprocessor instruction decoding
- Automatic health monitoring systems
- Speed control of medern motors
- Automation system
- Time division multiplexing system
- Memory system of computers
- Injectors
- CPU memory location identification
- Make full adder
- Memory chips
