SN74LVC157ARGYR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-VFQFN Exposed Pad |
| Number of Pins | 16 |
| Weight | 37.194574mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~3.6V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74LVC157 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Circuit | 4 x 2:1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Number of Channels | 4 |
| Load Capacitance | 50pF |
| Power Dissipation | 500mW |
| Number of Bits | 2 |
| Throw Configuration | DPST |
| Propagation Delay | 8.1 ns |
| Family | LVC/LCX/Z |
| Number of Inputs | 8 |
| Current - Output High, Low | 24mA 24mA |
| Supply Type | Single |
| Bandwidth | 100MHz |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 1mm |
| Length | 4mm |
| Width | 3.5mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVC157ARGYR Overview
Due to the fact that it is provided in the 16-VFQFN Exposed Pad, digital switch allows the board to be compacted.Cut Tape (CT) is the packaging method.As far as mounting is concerned, digital switch ic uses Surface Mount.the multiplexers uses an analog IC Multiplexer.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.Design engineers have more flexibility when digital controlled switch operates at 2V~3.6V voltage.Multiplexers of the 74LVC series can be used in a wide range of applications.There are 16 terminations included in its basic configuration.The base part number is 74LVC157, which can also be used to find its logic switch related parts.For multiplexer's system, a voltage of 1.8V is supplied.A component pin count of 16 can be found on this turn signal switch.Single is used as its supply type.This multiplexer ic has 16 pins configured.This unit is mounted in the way of Surface Mount.The LVC/LCX/Z family includes the logic switch.In this signal multiplexer, there are 2 bits provided.It is advisable to keep the maximum supply voltage (Vsup) at 3.6V in order to prevent some unnecessary failures.Normally, 3.3V is powered by a battery.The turn signal switch contains 1 outputs designed to operate.It has 8 inputs.The switches is packaged according to the way of TR.In the turn signal switch's circuit, there are 4 channels used for transmission.
SN74LVC157ARGYR Features
Supplied in the 16-VFQFN Exposed Pad package
Adopting a supply type of Single
Power supplies of 3.3V
SN74LVC157ARGYR Applications
There are a lot of Texas Instruments SN74LVC157ARGYR Signal Switches / Multiplexers / Decoders applications.
- Recording transmission
- Communication system
- Relay
- Code conversion
- Audio transmission
- Speed synchronization of multiple motors in industries
- D/A converters
- To select different devices in microprocessor input
- Data collection system
- Idle motor
