SN74LVC157ARGYRG4
| Parameters | |
|---|---|
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| Type | Multiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~3.6V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74LVC157 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Circuit | 4 x 2:1 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Number of Channels | 4 |
| Load Capacitance | 50pF |
| Power Dissipation | 500mW |
| Number of Bits | 2 |
| Propagation Delay | 8.1 ns |
| Family | LVC/LCX/Z |
| Number of Inputs | 8 |
| Current - Output High, Low | 24mA 24mA |
| Supply Type | Single |
| Bandwidth | 100MHz |
| Output Polarity | TRUE |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 1mm |
| Length | 4mm |
| Width | 3.5mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-VFQFN Exposed Pad |
| Number of Pins | 16 |
| Weight | 37.194574mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LVC |
SN74LVC157ARGYRG4 Overview
For the purpose of saving board space, digital switch is included in the 16-VFQFN Exposed Pad.The package is in the form of Tape & Reel (TR).Mounting is performed using Surface Mount.Multiplexer is the analog IC that the multiplexers uses.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.When digital controlled switch operates at 2V~3.6V, designers have superior flexibility.Multiplexers of the 74LVC series can be used in a wide range of applications.The basic configuration of this system includes 16 terminations.The base part number is 74LVC157, so you can find its logic switch related parts using that number.In multiplexer's system, 1.8V is the voltage supplied.A component pin count of 16 is found on this turn signal switch.Single is used as its supply type.This multiplexer ic is configured with 16 pins.The mounting point is Surface Mount.I would like to refer to the logic switch as a member of the LVC/LCX/Z family.In this signal multiplexer, there are 2 bits provided.It is advisable to keep the maximum supply voltage (Vsup) at 3.6V in order to prevent some unnecessary failures.Normally, 3.3V is powered by a battery.As part of the operation of this turn signal switch, there are 1 outputs.The multiplexer is equipped with 8 inputs.TR is used to package the switches.This turn signal switch's circuit is based on a circuit with 4 channels.
SN74LVC157ARGYRG4 Features
Supplied in the 16-VFQFN Exposed Pad package
Adopting a supply type of Single
Power supplies of 3.3V
SN74LVC157ARGYRG4 Applications
There are a lot of Texas Instruments SN74LVC157ARGYRG4 Signal Switches / Multiplexers / Decoders applications.
- Small scale TV wall
- Speed control of medern motors
- A/D converters
- Analog to digital conversion
- Automation system
- Time division multiplexing system
- Data demultiplexing
- Microprocessor memory systems
- LVDS
- HD surveillance system
