SN74LVC16373ADGVR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 48 |
| Weight | 123.490523mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.4mm |
| Base Part Number | 74LVC16373 |
| Pin Count | 48 |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 16 |
| Propagation Delay | 4.2 ns |
| Quiescent Current | 20μA |
| Turn On Delay Time | 2.1 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Control Type | ENABLE LOW |
| Number of Input Lines | 3 |
| Independent Circuits | 2 |
| Number of Output Lines | 1 |
| Count Direction | UNIDIRECTIONAL |
| Translation | N/A |
| Height | 1.2mm |
| Length | 9.7mm |
| Width | 4.4mm |
| Thickness | 1.05mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVC16373ADGVR Overview
It is embedded in the 48-TFSOP (0.173, 4.40mm Width) package. This package has the format of Cut Tape (CT). In its configuration, Tri-State is used as the output. The Logic type of this electrical device is D-Type Transparent Latch. Mounting this electronic component follows the Surface Mount method. There is no supply voltage for this device. There is -40°C~85°C operating temperature. There are a number of FPGAs in this series, including this one. The electronic part in this image has 16 bits. This device has been designed with 48 terminations available. There is no doubt that it belongs to the family 74LVC16373. It operates with a supply voltage of 1.8V. 48 pins are available on it. There is a device in this electronic family called LVC/LCX/Z. With the design of the board, there are only 48 pins. The electronic part is mounted in a way that corresponds to Surface Mount. This device is equipped with 2 ports. It belongs to the subcategory of FF/Latches. There are electronic circuits attached to the 3 input lines. Considering the reliability of this device, it would be a good candidate for TR. Its 24mA output current allows for maximum design flexibility. 1 output lines provide binary equivalents of input lines. It consumes 20μA of quiescent current without being affected by external factors. It achieves superior flexibility by using 8 circuits.
SN74LVC16373ADGVR Features
48-TFSOP (0.173, 4.40mm Width) package
74LVC series
16 Bits
74LVC16373 family
48 pin count
48 pins
SN74LVC16373ADGVR Applications
There are a lot of Texas Instruments SN74LVC16373ADGVR Latches applications.
- Lamp and Display (LED)
- Parallel Output
- Frequency
- Decade counting 7-segment decimal display
- Decade counting
- A/D converters
- OC-48 communication systems
- Storage
- Stacked or Push-Down Registers
- Clocks
