banner_page

SN74LVC16373ADL

D-Type, Latch 1.65V~3.6V 8 Bits Tri-State Latches 74LVC Series 74LVC16373 48 Pins DUAL CMOS 48-BSSOP (0.295, 7.50mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74LVC16373ADL
  • Package: 48-BSSOP (0.295, 7.50mm Width)
  • Datasheet: PDF
  • Stock: 460
  • Description: D-Type, Latch 1.65V~3.6V 8 Bits Tri-State Latches 74LVC Series 74LVC16373 48 Pins DUAL CMOS 48-BSSOP (0.295, 7.50mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 6 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 48-BSSOP (0.295, 7.50mm Width)
Number of Pins 48
Weight 600.301152mg
Operating Temperature -40°C~85°C
Packaging Tube
Series 74LVC
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 48
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory FF/Latches
Technology CMOS
Voltage - Supply 1.65V~3.6V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 1.8V
Terminal Pitch 0.635mm
Base Part Number 74LVC16373
Pin Count 48
Output Type Tri-State
Circuit 8:8
Polarity Non-Inverting
Supply Voltage-Max (Vsup) 3.6V
Power Supplies 3.3V
Supply Voltage-Min (Vsup) 1.65V
Load Capacitance 50pF
Number of Ports 2
Output Current 24mA
Number of Bits 8
Propagation Delay 4.2 ns
Turn On Delay Time 2.1 ns
Family LVC/LCX/Z
Logic Function D-Type, Latch
Output Characteristics 3-STATE
Current - Output High, Low 24mA 24mA
Logic Type D-Type Transparent Latch
Control Type ENABLE LOW
Number of Input Lines 16
Independent Circuits 2
Count Direction UNIDIRECTIONAL
Translation N/A
Height 2.79mm
Length 15.88mm
Width 7.49mm
Thickness 2.59mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

SN74LVC16373ADL Overview


A package called 48-BSSOP (0.295, 7.50mm Width) contains it. It is packaged in the way of Tube. It uses Tri-State as the output. The Logic type of this electrical device is D-Type Transparent Latch. According to Surface Mount, this electronic part is mounted. A 1.65V~3.6V voltage supply is required for operation. There is -40°C~85°C operating temperature. There are a number of FPGAs in this series, including this one. It is designed with 8 bits. As far as this device is concerned, it has no terminations. The family it belongs to is 74LVC16373. It operates with a supply voltage of 1.8V. There are 48 pins on it. It is a member of the LVC/LCX/Z family of electronic devices. It is designed with 48 pins. Surface Mount is used to mount this electronic part. In this device, there is a total of 2 ports available for use. This part can be found within the FF/Latches subcategory. During this period, the maximum supply voltage (Vsup) reaches 3.6V. It operates from 3.3V power supplies. A voltage greater than 1.65V must be supplied as a power supply (Vsup). Electronic circuits are represented by 16 input lines. With 24mA, maximum design flexibility is ensured.

SN74LVC16373ADL Features


48-BSSOP (0.295, 7.50mm Width) package
74LVC series
8 Bits
74LVC16373 family
48 pin count
48 pins
3.3V power supplies

SN74LVC16373ADL Applications


There are a lot of Texas Instruments SN74LVC16373ADL Latches applications.

  • Pattern generators
  • Shift Registers
  • Parallel Input
  • Automotive ADAS
  • Ring counter
  • Control circuits
  • Synchronous frequency dividers
  • Flip-flops
  • Parallel-to-Serial Data Conversion
  • Parallel data storage

Write a review

Note: HTML is not translated!
    Bad           Good