SN74LVC16373ADLG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 48 |
| Weight | 600.301152mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.635mm |
| Base Part Number | 74LVC16373 |
| Pin Count | 48 |
| Output Type | Tri-State |
| Number of Elements | 2 |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 1.65V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 16 |
| Propagation Delay | 7.1 ns |
| Turn On Delay Time | 2.1 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Control Type | ENABLE LOW |
| Number of Output Lines | 16 |
| Count Direction | UNIDIRECTIONAL |
| Translation | N/A |
| Height | 2.79mm |
| Length | 15.88mm |
| Width | 7.49mm |
| Thickness | 2.59mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVC16373ADLG4 Overview
Package 48-BSSOP (0.295, 7.50mm Width) includes it. Tube is the way in which it is packaged. In its configuration, Tri-State is used as the output. There is a logic type of D-Type Transparent Latch associated with this electrical device. The electronic component is mounted according to the Surface Mount method. With a supply voltage of 1.65V~3.6V, it operates. During operation, the temperature is set at -40°C~85°C. In the 74LVC series, this FPGA is located. The design of this electronic part contains 16 bits. A device such as this has 48 terminations designed. 74LVC16373 is the family name of it. With a supply voltage of 1.8V, it operates. The device is equipped with 48 pins. This electronic device belongs to the family of LVC/LCX/Z. This board has 48 pins on it, which is what it is designed for. Surface Mount is the method used for mounting this electronic part. This device is equipped with 2 ports. The part is in the FF/Latches subcategory. It reaches a maximum supply voltage (Vsup) of 3.6V. A total of 3.3V power supplies are required for it to operate. Ensure that the supply voltage (Vsup) is greater than 1.65V. The output current of 24mA makes it feature maximum design flexibility. Regardless of the input line, the binary equivalent of the input line will be generated by the 16 output lines. This element consists of 2.
SN74LVC16373ADLG4 Features
48-BSSOP (0.295, 7.50mm Width) package
74LVC series
16 Bits
74LVC16373 family
48 pin count
48 pins
3.3V power supplies
2 elements
SN74LVC16373ADLG4 Applications
There are a lot of Texas Instruments SN74LVC16373ADLG4 Latches applications.
- Display driver
- Synchronous frequency dividers
- Parallel data storage
- Stacked or Push-Down Registers
- Sample and hold register
- Registers
- Parallel data synchronization
- Watches
- Up/down difference counting
- Counters
