banner_page

SN74LVC16373ADLRG4

D-Type, Latch 8 Bits Latches 48 Pins DUAL CMOS SSOP


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74LVC16373ADLRG4
  • Package: SSOP
  • Datasheet: -
  • Stock: 991
  • Description: D-Type, Latch 8 Bits Latches 48 Pins DUAL CMOS SSOP(Kg)

Details

Tags

Parameters
Mount Surface Mount
Package / Case SSOP
Number of Pins 48
Weight 600.301152mg
Packaging Tape and Reel
JESD-609 Code e4
Moisture Sensitivity Level (MSL) 1
Number of Terminations 48
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Max Operating Temperature 125°C
Min Operating Temperature -40°C
Subcategory Bus Driver/Transceiver
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 1.8V
Terminal Pitch 0.635mm
Pin Count 48
Number of Elements 2
Polarity Non-Inverting
Power Supplies 3.3V
Temperature Grade AUTOMOTIVE
Number of Channels 16
Max Supply Voltage 3.6V
Min Supply Voltage 1.65V
Load Capacitance 50pF
Number of Ports 2
Current - Output 24mA
Number of Bits 8
Propagation Delay 7.1 ns
Quiescent Current 20μA
Turn On Delay Time 2.1 ns
Family LVC/LCX/Z
Logic Function D-Type, Latch
Output Characteristics 3-STATE
Logic IC Type BUS DRIVER
High Level Output Current -24mA
Low Level Output Current 24mA
Independent Circuits 2
Height 2.59mm
Length 15.88mm
Width 7.49mm
Radiation Hardening No
RoHS Status RoHS Compliant
Lead Free Lead Free

SN74LVC16373ADLRG4 Overview


The SSOP package contains it. As a result, it has a packaging of Tape and Reel. An electronic part with 8 bits is designed. This device is designed with 48 terminations. In order to function, the supply voltage should be set to 1.8V. It has 48 pins that makes it easy to use. It is a member of the LVC/LCX/Z family of electronic devices. It is designed with 48 pins. Surface Mount is used to mount this electronic part. This device has 2 ports on board, which are all available at the same time. This part can be found within the Bus Driver/Transceiver subcategory. The device is powered by 3.3V power supplies. The current consumed by the device is 20μA volts in quiescent mode, which cannot be affected by external factors. This element consists of 2. 24mA is the low level output current. There is -24mA output current at the high level. It is recommended that the operating temperature not exceed 125°C. -40°C is the minimum operating temperature. It supports a maximum supply voltage of 3.6V. The minimal supply voltage is 1.65V. There is a logic IC BUS DRIVER used in the system. The 24mA output current gives it maximum design flexibility.

SN74LVC16373ADLRG4 Features


SSOP package
8 Bits
48 pin count
48 pins
3.3V power supplies
2 elements

SN74LVC16373ADLRG4 Applications


There are a lot of Texas Instruments SN74LVC16373ADLRG4 Latches applications.

  • Ring counter
  • Automotive Cluster
  • Four-bit storage with output enable
  • Communication systems
  • TV Set-top Boxes
  • Counter
  • Timers
  • Shift right with parallel loading
  • Stacked or Push-Down Registers
  • Automotive Infotainment

Write a review

Note: HTML is not translated!
    Bad           Good