banner_page

SN74LVC16373AGQLR

D-Type, Latch 1.65V~3.6V 16 Bits Tri-State Latches 74LVC Series 74LVC16373 56 Pins BOTTOM CMOS 56-VFBGA


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74LVC16373AGQLR
  • Package: 56-VFBGA
  • Datasheet: -
  • Stock: 682
  • Description: D-Type, Latch 1.65V~3.6V 16 Bits Tri-State Latches 74LVC Series 74LVC16373 56 Pins BOTTOM CMOS 56-VFBGA(Kg)

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 56-VFBGA
Number of Pins 56
Weight 58.796911mg
Operating Temperature -40°C~85°C
Packaging Cut Tape (CT)
Series 74LVC
JESD-609 Code e0
Pbfree Code no
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 56
Terminal Finish Tin/Lead (Sn/Pb)
Subcategory FF/Latches
Packing Method TAPE AND REEL
Technology CMOS
Voltage - Supply 1.65V~3.6V
Terminal Position BOTTOM
Terminal Form BALL
Peak Reflow Temperature (Cel) 240
Number of Functions 2
Supply Voltage 1.8V
Terminal Pitch 0.65mm
Base Part Number 74LVC16373
Pin Count 56
Output Type Tri-State
Circuit 8:8
Polarity Non-Inverting
Number of Circuits 8
Load Capacitance 50pF
Number of Ports 2
Number of Bits 16
Propagation Delay 7.1 ns
Turn On Delay Time 2.1 ns
Family LVC/LCX/Z
Logic Function D-Type, Latch
Current - Output High, Low 24mA 24mA
Logic Type D-Type Transparent Latch
Number of Input Lines 3
Independent Circuits 2
Number of Output Lines 1
Length 7mm
Width 4.5mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Contains Lead

SN74LVC16373AGQLR Overview


In the package 56-VFBGA, it can be found. A Cut Tape (CT) package is used to package it. In its configuration, Tri-State is used as the output. This electrical device has a logic type of D-Type Transparent Latch. The electronic component is mounted according to the Surface Mount method. The voltage supply is 1.65V~3.6V. A temperature of -40°C~85°C is used for operation. This FPGA is part of the 74LVC series. An electronic part with 16 bits is designed. There are 56 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. There is no doubt that it belongs to the family 74LVC16373. The supply voltage of the device is 1.8V. 56 pins are provided. This electronic device is categorized as a LVC/LCX/Z electronic device. There are 56 pins on it. Mounting this electronic component follows the Surface Mount method. This device has 2 ports that can be connected to it. Subcategory FF/Latches contains this part. There are 3 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. On the basis of its reliability, this device is well suited for TAPE AND REEL. There are 1 output lines that correspond to the binary equivalents of the input line. The superior flexibility of this circuit can be attributed to the use of 8 circuits.

SN74LVC16373AGQLR Features


56-VFBGA package
74LVC series
16 Bits
74LVC16373 family
56 pin count
56 pins

SN74LVC16373AGQLR Applications


There are a lot of Texas Instruments SN74LVC16373AGQLR Latches applications.

  • Network Switches
  • Display
  • Data acquisition
  • Storage
  • Shift Registers
  • Parallel Input
  • Parallel Input
  • Digital bus buffer
  • Automatic test equipment
  • Instrumentation

Write a review

Note: HTML is not translated!
    Bad           Good