SN74LVC16373AGRDR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-VFBGA |
| Number of Pins | 56 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LVC |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 54 |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.8mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LVC16373 |
| Pin Count | 54 |
| JESD-30 Code | R-PBGA-B54 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 1.65V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Turn On Delay Time | 2.1 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Output Polarity | TRUE |
| Propagation Delay (tpd) | 7.1 ns |
| Independent Circuits | 2 |
| Length | 8mm |
| Width | 5.5mm |
| RoHS Status | ROHS3 Compliant |
SN74LVC16373AGRDR Overview
It is embedded in the 56-VFBGA package. The package is in the form of Tape & Reel (TR). Tri-State is the output configured for it. D-Type Transparent Latch is the logic type of this electrical device. Based on the way of Surface Mount, this electronic part is mounted. A voltage of 1.65V~3.6V is used as the supply voltage for this device. A temperature of -40°C~85°C is used for operation. An FPGA in this series belongs to the 74LVC family. An electronic part with 8 bits is designed. The device consists of 54 terminations that are designed to be used in conjunction with it. It is a member of the 74LVC16373 family. A 1.8V voltage supply is required for operation. 54 pins are provided. It is part of the family of electronic devices called LVC/LCX/Z. With the design of the board, there are only 56 pins. Mounting this electronic component follows the Surface Mount method. In this device, there are 2 ports. Subcategory FF/Latches contains this part. Vsup reaches 3.6V as the maximum supply voltage. It operates from 3.3V power supplies. A voltage greater than 1.65V must be supplied as a power supply (Vsup). This device is well suited for TAPE AND REEL based on its reliable performance.
SN74LVC16373AGRDR Features
56-VFBGA package
74LVC series
8 Bits
74LVC16373 family
54 pin count
56 pins
3.3V power supplies
SN74LVC16373AGRDR Applications
There are a lot of Texas Instruments SN74LVC16373AGRDR Latches applications.
- Multi-line decoders
- Relay replacement
- Control circuits
- Bus system register with enable parallel lines at bus side
- Accumulator Registers
- Sample and hold register
- Counting
- Communication systems
- Shift Registers
- Up-Down Johnson
