SN74LVC16373DLR
| Parameters | |
|---|---|
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Base Part Number | 74LVC16373 |
| Pin Count | 48 |
| Output Type | Tri-State |
| Operating Supply Voltage | 3.3V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Number of Circuits | 1 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 16 |
| Propagation Delay | 9 ns |
| Turn On Delay Time | 2.1 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Prop. Delay@Nom-Sup | 7 ns |
| Control Type | ENABLE LOW/HIGH |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Input Lines | 3 |
| Independent Circuits | 2 |
| Translation | N/A |
| Height | 2.79mm |
| Length | 15.88mm |
| Width | 7.49mm |
| Thickness | 2.59mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 48 |
| Weight | 600.301152mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
SN74LVC16373DLR Overview
In the 48-BSSOP (0.295, 7.50mm Width) package, it can be found as an embedded module. The package is in the form of Tape & Reel (TR). In its configuration, Tri-State is used as the output. This electrical device has a logic type of D-Type Transparent Latch. According to Surface Mount, this electronic part is mounted. A 1.65V~3.6V supply voltage is required to operate it. There is a temperature of -40°C~85°C at which the system operates. This FPGA is part of the 74LVC series. This electronic part is designed with 16 Bits. This device has been designed with 48 terminations available. 74LVC16373 is the family name of it. With a supply voltage of 3.3V, it operates. The device is equipped with 48 pins. It is part of the family of electronic devices called LVC/LCX/Z. 48 pins are used in its design. The electronic part is mounted using the Surface Mount method. This device has 2 ports on board, which are all available at the same time. This part is included in FF/Latches. Input Lines consist of electronic circuits, and there are 3. On the basis of its reliability, this device is well suited for TR. It features maximum flexibility in design due to 24mA output current. A high level of efficiency is achieved by maintaining the supply voltage at 3.3V. Its superior flexibility is achieved by using 1 circuits. A maximal power current (ICC) is generated for its operation at 0.04mA.
SN74LVC16373DLR Features
48-BSSOP (0.295, 7.50mm Width) package
74LVC series
16 Bits
74LVC16373 family
48 pin count
48 pins
SN74LVC16373DLR Applications
There are a lot of Texas Instruments SN74LVC16373DLR Latches applications.
- Stacked or Push-Down Registers
- Shift Registers
- Parallel data storage
- BCD counting
- Pseudo-random code generators
- A/D and D/A conversion
- Address register
- Counter
- Automatic test equipment
- Clocks
