SN74LVC16374ADGGR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 48 |
| Weight | 223.195796mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74LVC16374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 16 |
| Clock Frequency | 150MHz |
| Propagation Delay | 6.5 ns |
| Quiescent Current | 20μA |
| Turn On Delay Time | 1.5 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 4.5ns @ 3.3V, 50pF |
| Prop. Delay@Nom-Sup | 4.5 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Number of Input Lines | 3 |
| Number of Output Lines | 1 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Height | 1.2mm |
| Length | 12.5mm |
| Width | 6.1mm |
| Thickness | 1.15mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVC16374ADGGR Overview
It is packaged in the way of 48-TFSOP (0.240, 6.10mm Width). It is contained within the Cut Tape (CT)package. T flip flop uses Tri-State, Non-Invertedas its output configuration. In the configuration of the trigger, Positive Edgeis used. It is mounted in the way of Surface Mount. The JK flip flop operates at 1.65V~3.6Vvolts. It is at -40°C~85°C TAdegrees Celsius that the system is operating. D-Typedescribes this flip flop. The 74LVCseries comprises this type of FPGA. In order for it to function properly, its output frequency should not exceed 150MHz. There are 2 elements in it. There are 48 terminations,The object belongs to the 74LVC16374 family. Power is provided by a 1.8V supply. A 5pFfarad input capacitance is provided by this T flip flop. It belongs to the family of electronic devices known as LVC/LCX/Z. There is an electronic part mounted in the way of Surface Mount. The electronic flip flop is designed with pins 48. This device has the clock edge trigger type of Positive Edge. This part is included in FF/Latches. The flip flop is designed with 16bits. A reliable performance of this D flip flop makes it well suited for use in TR. A total of 2ports are embedded in the D flip flop. This T flip flop features a maximum design flexibility due to its output current of 24mA. There are 1 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. A total of 3input lines have been provided. In terms of quiescent current, it consumes 20μA .
SN74LVC16374ADGGR Features
Cut Tape (CT) package
74LVC series
48 pins
16 Bits
SN74LVC16374ADGGR Applications
There are a lot of Texas Instruments SN74LVC16374ADGGR Flip Flops applications.
- Load Control
- Reduced system switching noise
- Computing
- Counters
- Bounce elimination switch
- Storage Registers
- QML qualified product
- Automotive
- Set-reset capability
- Test & Measurement
