SN74LVC16374AZRDR
| Parameters | |
|---|---|
| Lifecycle Status | LIFEBUY (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 54-TFBGA |
| Number of Pins | 54 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74LVC |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Last Time Buy |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 54 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LVC16374 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 16 |
| Clock Frequency | 150MHz |
| Propagation Delay | 4.9 ns |
| Turn On Delay Time | 1.5 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 20μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 4.5ns @ 3.3V, 50pF |
| Prop. Delay@Nom-Sup | 4.5 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Number of Input Lines | 1 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Height | 1.2mm |
| Length | 8mm |
| Width | 5.5mm |
| Thickness | 800μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVC16374AZRDR Overview
The flip flop is packaged in 54-TFBGA. The Cut Tape (CT)package contains it. T flip flop is configured with an output of Tri-State, Non-Inverted. This trigger uses the value Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. The JK flip flop operates with an input voltage of 1.65V~3.6V volts. It is operating at a temperature of -40°C~85°C TA. D-Typeis the type of this D latch. JK flip flop belongs to the 74LVCseries of FPGAs. Its output frequency should not exceed 150MHz Hz. The element count is 2 . As a result, it consumes 20μA quiescent current and is not affected by external forces. Terminations are 54. The 74LVC16374 family contains this object. It is powered from a supply voltage of 1.8V. The input capacitance of this T flip flop is 5pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. LVC/LCX/Zis the family of this D flip flop. In this case, the electronic component is mounted in the way of Surface Mount. A total of 54pins are provided on this board. This device has Positive Edgeas its clock edge trigger type. This part is included in FF/Latches. An electronic part with 16bits has been designed. It reaches the maximum supply voltage (Vsup) at 3.6V. As a result of its reliability, this D flip flop is ideally suited for TR. The D latch runs on a voltage of 3.3V volts. A D flip flop with 2embedded ports is available. With an output current of 24mA, this device offers maximum design flexibility. 1input lines are available for you to choose from.
SN74LVC16374AZRDR Features
Cut Tape (CT) package
74LVC series
54 pins
16 Bits
3.3V power supplies
SN74LVC16374AZRDR Applications
There are a lot of Texas Instruments SN74LVC16374AZRDR Flip Flops applications.
- Load Control
- Latch-up performance
- Memory
- Instrumentation
- Latch
- ESD protection
- Balanced 24 mA output drivers
- Counters
- Buffered Clock
- ESD performance
