SN74LVC1G175DCKT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Number of Pins | 6 |
| Weight | 2.494758mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Base Part Number | 74LVC1G175 |
| Function | Reset |
| Output Type | Non-Inverted |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Number of Circuits | 1 |
| Load Capacitance | 50pF |
| Output Current | 32mA |
| Number of Bits | 1 |
| Clock Frequency | 175MHz |
| Propagation Delay | 13.4 ns |
| Turn On Delay Time | 1 ns |
| Family | LVC/LCX/Z |
| Current - Quiescent (Iq) | 10μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 32mA |
| Max I(ol) | 0.032 A |
| Max Propagation Delay @ V, Max CL | 5ns @ 5V, 50pF |
| Prop. Delay@Nom-Sup | 5.7 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVC1G175DCKT Overview
6-TSSOP, SC-88, SOT-363is the packaging method. As part of the package Tape & Reel (TR), it is embedded. T flip flop uses Non-Invertedas the output. This trigger uses the value Positive Edge. Surface Mountis occupied by this electronic component. With a supply voltage of 1.65V~5.5V volts, it operates. It is operating at -40°C~125°C TA. There is D-Type type of electronic flip flop associated with this device. In this case, it is a type of FPGA belonging to the 74LVC series. Its output frequency should not exceed 175MHz. Despite external influences, it consumes 10μAof quiescent current. Currently, there are 6 terminations. The 74LVC1G175 family contains it. It is powered by a voltage of 1.8V . Input capacitance of this device is 3pF farads. In terms of electronic devices, this device belongs to the LVC/LCX/Zfamily of devices. In this case, the electronic component is mounted in the way of Surface Mount. It is designed with 6 pins. In this device, the clock edge trigger type is Positive Edge. It is part of the FF/Latchesbase part number family. There are 1bits in its design. As soon as 5.5Vis reached, Vsup reaches its maximum value. Due to its superior flexibility, it uses 1 circuits. Due to its reliability, this T flip flop is well suited for TR. An electrical current of 3.3V volts is applied to it. With an output current of 32mA, this device offers maximum design flexibility.
SN74LVC1G175DCKT Features
Tape & Reel (TR) package
74LVC series
6 pins
1 Bits
3.3V power supplies
SN74LVC1G175DCKT Applications
There are a lot of Texas Instruments SN74LVC1G175DCKT Flip Flops applications.
- Balanced Propagation Delays
- Guaranteed simultaneous switching noise level
- Single Up Count-Control Line
- Single Down Count-Control Line
- Clock pulse
- Digital electronics systems
- Matched Rise and Fall
- Bus hold
- Safety Clamp
- Memory
