banner_page

SN74LVC1G18DBVR

6 Terminations1.65V~5.5V 6 Pin 74LVC1G18 Signal switch74LVC Series 1 Functions


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74LVC1G18DBVR
  • Package: SOT-23-6
  • Datasheet: -
  • Stock: 940
  • Description: 6 Terminations1.65V~5.5V 6 Pin 74LVC1G18 Signal switch74LVC Series 1 Functions(Kg)

Details

Tags

Parameters
Mounting Type Surface Mount
Package / Case SOT-23-6
Number of Pins 6
Weight 6.492041mg
Operating Temperature -40°C~85°C
Packaging Cut Tape (CT)
Series 74LVC
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 6
Termination SMD/SMT
ECCN Code EAR99
Type Demultiplexer
Subcategory Decoder/Drivers
Packing Method TR
Technology CMOS
Voltage - Supply 1.65V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 1.8V
Terminal Pitch 0.95mm
Base Part Number 74LVC1G18
Pin Count 6
Max Output Current 32mA
Circuit 1 x 1:2
Polarity Non-Inverting
Supply Voltage-Max (Vsup) 5.5V
Power Supplies 3.3V
Number of Channels 1
Load Capacitance 50pF
Number of Bits 1
Throw Configuration SPDT
Propagation Delay 12.7 ns
Quiescent Current 10μA
Turn On Delay Time 12.7 ns
Family LVC/LCX/Z
Output Characteristics 3-STATE
Current - Output High, Low 32mA 32mA
Supply Type Single
Number of Input Lines 1
Voltage Supply Source Single Supply
Number of Output Lines 2
Input Conditioning STANDARD
Height 1.45mm
Length 2.9mm
Width 1.6mm
Thickness 1.2mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 3 days ago)
Contact Plating Gold
Mount Surface Mount

SN74LVC1G18DBVR Overview


It is included in the SOT-23-6 in order to save board space.Cut Tape (CT) represents its packaging.The method digital switch ic adopts for mounting is Surface Mount.In the multiplexers, the analog IC is indicated by Demultiplexer.If the operating temperature is maintained at -40°C~85°C, turn signal switch will not be susceptible to external factors.When digital controlled switch operates at 1.65V~5.5V, designers have superior flexibility.Multiplexers in the 74LVC series are suitable for a wide range of applications.The basic configuration of this system includes 6 terminations.You can also find related parts by using its logic switch base part number of 74LVC1G18.The multiplexer is supplied with 1.8V voltage.In this turn signal switch, there are 6 components that can be connected to each pin.At the end of a conductor, it uses GULL WING as the point where the conductor ends.Single is employed as its supply type.It is configured with 6 pins.It is positioned in the direction of Surface Mount.The logic switch belongs to the family of LVC/LCX/Z.In this signal multiplexer, there are 1 bits that are provided.Avoid unnecessary failures by keeping Vsup at 5.5V.In order to maintain mux switch's normal operation, power is provided to 3.3V.The part belongs to the Decoder/Drivers category of signal switches.There are no external influences on this multiplexer ic, so it consumes 10μA current.The switches package is packaged in a way which is consistent with TR.It is possible to accept voltage levels through 1 input lines of multiplexers.A signal source has 2 output lines.Transmission is carried out over 1 channels in the turn signal switch's circuit.

SN74LVC1G18DBVR Features


Supplied in the SOT-23-6 package
Adopting a supply type of Single
Power supplies of 3.3V
1 input lines
2 output lines

SN74LVC1G18DBVR Applications


There are a lot of Texas Instruments SN74LVC1G18DBVR Signal Switches / Multiplexers / Decoders applications.

  • Data bus control
  • Data communication
  • D/A converters
  • Microprocessor memory systems
  • Relay
  • HD surveillance system
  • Idle motor
  • Injectors
  • Steel plants
  • CPU memory location identification

Write a review

Note: HTML is not translated!
    Bad           Good