SN74LVC1G18DCKRE4
| Parameters | |
|---|---|
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | Demultiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Decoder/Drivers |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Base Part Number | 74LVC1G18 |
| Pin Count | 6 |
| Number of Outputs | 2 |
| Number of Elements | 1 |
| Circuit | 1 x 1:2 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Load Capacitance | 50pF |
| Number of Bits | 1 |
| Propagation Delay | 12.7 ns |
| Quiescent Current | 10μA |
| Turn On Delay Time | 12.7 ns |
| Family | LVC/LCX/Z |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 32mA |
| Supply Type | Single |
| Voltage Supply Source | Single Supply |
| Input Conditioning | STANDARD |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Number of Pins | 6 |
| Weight | 2.494758mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
SN74LVC1G18DCKRE4 Overview
Digital switch is provided in the 6-TSSOP, SC-88, SOT-363 for the purpose of saving board space.Tape & Reel (TR) is the packaging method.In terms of mounting, digital switch ic uses the method of Surface Mount.Demultiplexer is the analog IC that the multiplexers uses.By maintaining the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.Designers have greater flexibility when digital controlled switch operates at a 1.65V~5.5V supply voltage.The multiplexers can be used for a wide range of applications since they are members of 74LVC series.This configuration includes 6 terminations as part of its basic functionality.The base part number is 74LVC1G18, which is also useful when looking up signal switch's related components.The multiplexer's system works with 1.8V voltage.In this turn signal switch, there are 6 components that can be connected to each pin.GULL WING is used as the point at which the conductors come to an end as part of this formula.Its supply type is Single, which is used as the source of power.The board has 6 pins configured.The multiplexer ic is mounted in the direction of Surface Mount.The logic switch is a member of the LVC/LCX/Z family.In this signal multiplexer, there are 1 bits provided.In order to avoid some unnecessary failures, you should maintain a maximum supply voltage (Vsup) of 5.5V.A power supply is provided for mux switch's normal operation of 3.3V.In order for the turn signal switch to work, there are 2 outputs.Decoder/Drivers is a category for the digital switch ics.Without the influence of external factors, it consumes 10μA current of multiplexer ic.The signal switching is packaged by TR. The mux switch configuration contains 1 elements.
SN74LVC1G18DCKRE4 Features
Supplied in the 6-TSSOP, SC-88, SOT-363 package
Adopting a supply type of Single
Power supplies of 3.3V
SN74LVC1G18DCKRE4 Applications
There are a lot of Texas Instruments SN74LVC1G18DCKRE4 Signal Switches / Multiplexers / Decoders applications.
- Injectors
- Small scale TV wall
- Code converters
- Microprocessor input/output systems
- Night vision cameras
- Frequency multiplexing system
- Control unit of Central Processing unit (CPU)
- A robotic vehicle with the metal detector
- Data communication
- Transmission from the computer system of a satellite
