SN74LVC1G18YZAR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-XFBGA, DSBGA |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74LVC |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | Demultiplexer |
| Subcategory | Decoder/Drivers |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 1.65V~5.5V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LVC1G18 |
| Pin Count | 6 |
| JESD-30 Code | R-XBGA-B6 |
| Qualification Status | Not Qualified |
| Circuit | 1 x 1:2 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Load Capacitance | 50pF |
| Throw Configuration | SPDT |
| Family | LVC/LCX/Z |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 32mA |
| Supply Type | Single |
| Max I(ol) | 0.024 A |
| Prop. Delay@Nom-Sup | 4.2 ns |
| Propagation Delay (tpd) | 9.3 ns |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Input Conditioning | STANDARD |
| Height Seated (Max) | 0.5mm |
| Width | 0.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVC1G18YZAR Overview
It is included in the 6-XFBGA, DSBGA in order to save board space.Cut Tape (CT) is the method used for packaging.Mounting is performed using Surface Mount.the multiplexers uses IC Demultiplexer as the analog IC.By keeping the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.When digital controlled switch operates at 1.65V~5.5V, designers are provided with a greater degree of flexibility.Since they are members of the 74LVC series, they can be used in a wide variety of applications.The basic configuration of this system includes 6 terminations.You can also find related parts by using its logic switch base part number of 74LVC1G18.The voltage supplied for multiplexer's system is 1.8V.multiplexer's systemThis turn signal switch contains 6 component pins.Conductors terminate at BALL in this design.Its supply type is Single, which is used as the source of power.It is mounted in the way of Surface Mount.I would like to refer to the logic switch as a member of the LVC/LCX/Z family.Avoid unnecessary failures by keeping Vsup at 5.5V.In order for 3.3V to operate normally, a power supply is provided.This is a signal switch that is categorized as Decoder/Drivers.The switches is packaged according to the way of TAPE AND REEL.
SN74LVC1G18YZAR Features
Supplied in the 6-XFBGA, DSBGA package
Adopting a supply type of Single
Power supplies of 3.3V
SN74LVC1G18YZAR Applications
There are a lot of Texas Instruments SN74LVC1G18YZAR Signal Switches / Multiplexers / Decoders applications.
- Idle motor
- Signal router
- Home automation system
- Arithmetic Logic Units
- Time division multiplexing system
- Electronic circuits
- HDMI applications
- Logic circuits
- Data bus control
- Recording transmission
