SN74LVC1G18YZPR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-XFBGA, DSBGA |
| Number of Pins | 6 |
| Weight | 1.700971mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LVC |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | Demultiplexer |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Decoder/Drivers |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~5.5V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LVC1G18 |
| Pin Count | 6 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Number of Elements | 1 |
| Circuit | 1 x 1:2 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Load Capacitance | 50pF |
| Number of Bits | 1 |
| Propagation Delay | 3.3 ns |
| Quiescent Current | 10μA |
| Turn On Delay Time | 12.7 ns |
| Family | LVC/LCX/Z |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 32mA |
| Supply Type | Single |
| Voltage Supply Source | Single Supply |
| Input Conditioning | STANDARD |
| Height | 500μm |
| Length | 1.5mm |
| Width | 900μm |
| Thickness | 2mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVC1G18YZPR Overview
In order to save board space, digital switch is located in the 6-XFBGA, DSBGA.The package is in the form of Tape & Reel (TR).Surface Mount is the mounting method digital switch ic uses.As the analog part, the circuit uses an analog IC Demultiplexer.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.With a supply voltage of 1.65V~5.5V, designers have greater flexibility of digital controlled switch.Multiplexers from the 74LVC series can be used in a wide range of applications.There is a design for terminating 6 as part of its basic configuration.The base part number is 74LVC1G18, which can also be used to find its logic switch related parts.For multiplexer's system, 1.8V voltage is supplied.Signal switch has 6 component pins.BALL is used as the point at which the conductors come to an end as part of this formula.Its supply type is Single, which is used as the source of power.It is configured with 6 pins.It is positioned in the direction of Surface Mount.The logic switch object belongs to the family of LVC/LCX/Z.There are 1 bits in signal multiplexer.To avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 5.5V.A power supply is provided for mux switch's normal operation of 3.3V.The turn signal switch has 2 outputs designed for operation.This is an the digital switch ic that is classified as Decoder/Drivers.It consumes 10μA current of multiplexer ic since it is not affected by external factors.The switches packaging is based on TR.A configuration element for the mux switch consists of 1 elements.
SN74LVC1G18YZPR Features
Supplied in the 6-XFBGA, DSBGA package
Adopting a supply type of Single
Power supplies of 3.3V
SN74LVC1G18YZPR Applications
There are a lot of Texas Instruments SN74LVC1G18YZPR Signal Switches / Multiplexers / Decoders applications.
- Make half adder
- Data transfer
- Idle motor
- Data communication
- A robotic vehicle with the metal detector
- War field flying robot with a night vision flying camera
- Electronic circuits
- Code converters
- Microprocessor input/output systems
- Automatic health monitoring systems
