Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
SOT-23-6 |
Number of Pins |
6 |
Weight |
6.492041mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Series |
74LVC |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
6 |
ECCN Code |
EAR99 |
Type |
Decoder/Demultiplexer |
Subcategory |
Decoder/Drivers |
Packing Method |
TR |
Technology |
CMOS |
Voltage - Supply |
1.65V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
1.8V |
Terminal Pitch |
0.95mm |
Base Part Number |
74LVC1G19 |
Pin Count |
6 |
Circuit |
1 x 1:2 |
Polarity |
Non-Inverting |
Supply Voltage-Max (Vsup) |
5.5V |
Power Supplies |
3.3V |
Number of Channels |
1 |
Load Capacitance |
50pF |
Number of Bits |
1 |
Throw Configuration |
SPDT |
Propagation Delay |
2.8 ns |
Quiescent Current |
10μA |
Turn On Delay Time |
16.1 ns |
Family |
LVC/LCX/Z |
Logic Function |
Decoder, Demultiplexer, Demux |
Output Characteristics |
3-STATE |
Current - Output High, Low |
32mA 32mA |
Supply Type |
Single |
Number of Input Lines |
1 |
Voltage Supply Source |
Single Supply |
Number of Output Lines |
2 |
Input Conditioning |
STANDARD |
Height |
1.45mm |
Length |
2.9mm |
Width |
1.6mm |
Thickness |
1.2mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74LVC1G19DBVR Overview
In order to save board space, digital switch is located in the SOT-23-6.Tape & Reel (TR) represents its packaging.Digital switch ic adheres to a mounting method of Surface Mount.In the multiplexers, the analog IC Decoder/Demultiplexer is used.When the operating temperature is kept at -40°C~85°C, turn signal switch will not be susceptible to external factors.Designers have greater flexibility using digital controlled switch when it works with 1.65V~5.5V voltage.The multiplexers can be used for a wide range of applications since they are members of 74LVC series.The basic configuration includes 6 terminations.The base part number is 74LVC1G19, so you can find its logic switch related parts using that number.The turn signal switch is supplied with a voltage of 1.8V volts.There are 6 component pins in this turn signal switch.It employs GULL WING as the point at which conductors come to an end.In this case, the supply type is Single.There are 6 pins on it.The multiplexer ic is mounted in the direction of Surface Mount.The logic switch is a member of the family of LVC/LCX/Z.In this signal multiplexer, there are 1 bits provided.Vsup (maximum supply voltage) should be kept as 5.5V to prevent unnecessary failures.mux switch's normal operation requires the power supply of 3.3V.In electronic terms, the digital switch ic is classified as part number Decoder/Drivers.It consumes 10μA current of multiplexer ic since it is not affected by external factors.The switches is packaged according to the way of TR.It is possible to accept voltage levels through 1 input lines of multiplexers.A signal source is provided by 2 output lines.This turn signal switch's circuit is based on a circuit with 1 channels.
SN74LVC1G19DBVR Features
Supplied in the SOT-23-6 package
Adopting a supply type of Single
Power supplies of 3.3V
1 input lines
2 output lines
SN74LVC1G19DBVR Applications
There are a lot of Texas Instruments SN74LVC1G19DBVR Signal Switches / Multiplexers / Decoders applications.
- Data demultiplexing
- GLAN
- Memory system of computers
- Recording transmission
- Data transfer
- Textile mills
- Enabling different rows of memory depending on address in memory chips
- Steel plants
- Enabling different functions units in microprocessor instruction decoding
- Implementing boolean functions with multiple variables