Parameters |
Voltage - Supply |
1.65V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
1.8V |
Terminal Pitch |
0.95mm |
Base Part Number |
74LVC1G19 |
Pin Count |
6 |
Number of Outputs |
2 |
Operating Supply Voltage |
3.3V |
Number of Elements |
1 |
Circuit |
1 x 1:2 |
Polarity |
Non-Inverting |
Supply Voltage-Max (Vsup) |
5.5V |
Load Capacitance |
50pF |
Number of Bits |
1 |
Propagation Delay |
2.8 ns |
Quiescent Current |
10μA |
Turn On Delay Time |
16.1 ns |
Family |
LVC/LCX/Z |
Logic Function |
Decoder, Demultiplexer |
Output Characteristics |
3-STATE |
Current - Output High, Low |
32mA 32mA |
Supply Type |
Single |
Voltage Supply Source |
Single Supply |
Number of Output Lines |
1 |
Input Conditioning |
STANDARD |
Height |
1.45mm |
Length |
2.9mm |
Width |
1.6mm |
Thickness |
1.2mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 week ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
SOT-23-6 |
Number of Pins |
6 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Series |
74LVC |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
6 |
ECCN Code |
EAR99 |
Type |
Decoder/Demultiplexer |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Decoder/Drivers |
Packing Method |
TR |
Technology |
CMOS |
SN74LVC1G19DBVT Overview
This is a relatively small item of digital switch that is included in the SOT-23-6 in order to save space on the board.The package is packaged in accordance with Tape & Reel (TR).Digital switch ic uses a Surface Mount mounting method.The analog IC used in the multiplexers can be referred to as Decoder/Demultiplexer.The operating temperature of -40°C~85°C will not be susceptible to external factors.When digital controlled switch operates at 1.65V~5.5V, designers have superior flexibility.Since they are members of the 74LVC series, they can be used in a wide variety of applications.As part of its basic configuration, 6 terminations are designed as a part of it.There is a base part number of 74LVC1G19 which can also be used in order to locate the logic switch that are related to this item.The turn signal switch is supplied with a voltage of 1.8V volts.In this turn signal switch, there are 6 components that can be connected to each pin.At the end of a conductor, it uses GULL WING as the point where the conductor ends.Its supply type is Single, which is used as the source of power.This multiplexer ic has 6 pins configured.The mounting is in the way of Surface Mount.The logic switch is a member of the family of LVC/LCX/Z.There are 1 bits in signal multiplexer.To avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 5.5V.There are 2 outputs designed to operate the turn signal switch.The part belongs to the Decoder/Drivers category of signal switches.No external influence consumes 10μA current of multiplexer ic.The performance of the multiplexers of a system can be reliably achieved with a supply voltage of 3.3V.The switches is packaged according to the way of TR.The signal source consists of 1 output lines.This mux switch configuration has 1 elements.
SN74LVC1G19DBVT Features
Supplied in the SOT-23-6 package
Adopting a supply type of Single
Operating with the supply voltage of 3.3V
1 output lines
SN74LVC1G19DBVT Applications
There are a lot of Texas Instruments SN74LVC1G19DBVT Signal Switches / Multiplexers / Decoders applications.
- Automatic Monitoring systems
- Recording transmission
- Speed synchronization of multiple motors in industries
- Frequency multiplexing system
- Control unit of Central Processing unit (CPU)
- To select different task for memory in microprocessor memory systems
- Make full adder
- CPU memory location identification
- High-performance memory systems
- War field flying robot with a night vision flying camera