SN74LVC1G19DCKRE4
| Parameters | |
|---|---|
| Weight | 2.494758mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | Decoder/Demultiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Decoder/Drivers |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Base Part Number | 74LVC1G19 |
| Pin Count | 6 |
| Number of Outputs | 2 |
| Number of Elements | 1 |
| Circuit | 1 x 1:2 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Load Capacitance | 50pF |
| Number of Bits | 1 |
| Propagation Delay | 2.8 ns |
| Quiescent Current | 10μA |
| Turn On Delay Time | 16.1 ns |
| Family | LVC/LCX/Z |
| Logic Function | Decoder, Demultiplexer |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 32mA |
| Supply Type | Single |
| Voltage Supply Source | Single Supply |
| Input Conditioning | STANDARD |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Number of Pins | 6 |
SN74LVC1G19DCKRE4 Overview
For the purpose of saving board space, digital switch is included in the 6-TSSOP, SC-88, SOT-363.Tape & Reel (TR) is the packaging method.For mounting, digital switch ic uses the method Surface Mount.For the analog part of the multiplexers, an IC Decoder/Demultiplexer is used.As long as the operating temperature is -40°C~85°C, turn signal switch will not be influenced by external factors.The turn signal switch is designed for use with a 1.65V~5.5V supply voltage, which gives it a lot of flexibility.The multiplexers can be used for a wide range of applications since they are members of 74LVC series.Among its basic features are 6 terminations.There is a base part number 74LVC1G19 that can be used to locate signal switch's related components as well.The multiplexer's system is powered by 1.8V volts.This turn signal switch has a total of 6 component pins.It employs GULL WING as the point at which conductors come to an end.Single is employed as its supply type.The board is configured with 6 pins.It is mounted in the way of Surface Mount.The logic switch is included into the family of LVC/LCX/Z.Signal multiplexer provides 1 bits.Avoid unnecessary failures by keeping Vsup at 5.5V.The power supply of 3.3V is provided for mux switch's normal operation.As a result, the turn signal switch consists of 2 outputs.In electronic terms, the digital switch ic is classified as part number Decoder/Drivers.It consumes 10μA current of multiplexer ic since it is not affected by external factors.The switches is packaged according to the way of TR.The mux switch configuration contains 1 elements.
SN74LVC1G19DCKRE4 Features
Supplied in the 6-TSSOP, SC-88, SOT-363 package
Adopting a supply type of Single
Power supplies of 3.3V
SN74LVC1G19DCKRE4 Applications
There are a lot of Texas Instruments SN74LVC1G19DCKRE4 Signal Switches / Multiplexers / Decoders applications.
- Enabling different rows of memory depending on address in memory chips
- A/D converters
- Memory chips
- Communication system
- Automatic Monitoring systems
- RF-based home automation system
- To select different devices in microprocessor output
- Transmission from the computer system of a satellite
- Data communication
- Steel plants
