SN74LVC1G29DCUR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VFSOP (0.091, 2.30mm Width) |
| Number of Pins | 8 |
| Weight | 9.610488mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Decoder/Demultiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Decoder/Drivers |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74LVC1G29 |
| Pin Count | 8 |
| Number of Outputs | 3 |
| Circuit | 1 x 2:3 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Number of Circuits | 1 |
| Load Capacitance | 50pF |
| Number of Bits | 1 |
| Propagation Delay | 15.8 ns |
| Quiescent Current | 10μA |
| Turn On Delay Time | 15.8 ns |
| Family | LVC/LCX/Z |
| Logic Function | Decoder, Demultiplexer, Demux |
| Number of Inputs | 2 |
| Current - Output High, Low | 32mA 32mA |
| Supply Type | Single |
| Voltage Supply Source | Single Supply |
| Input Conditioning | STANDARD |
| Height | 900μm |
| Length | 2.3mm |
| Width | 2mm |
| Thickness | 850μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVC1G29DCUR Overview
In order to save board space, digital switch is located in the 8-VFSOP (0.091, 2.30mm Width).The package is in the form of Tape & Reel (TR).Mounting is performed using Surface Mount.For the analog part of the multiplexers, an IC Decoder/Demultiplexer is used.As long as the operating temperature is -40°C~85°C, turn signal switch will not be influenced by external factors.Using a 1.65V~5.5V supply voltage provides digital controlled switch's superior flexibility for designers.The multiplexers can be used for a wide range of applications since they are members of 74LVC series.Among its basic configurations are 8 terminations.You can also find related parts by using its logic switch base part number of 74LVC1G29.The multiplexer is supplied with 1.8V voltage.A component pin count of 8 is found on this turn signal switch.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.This supply type employs Single.Currently, it is configured with a 8 pin configuration.The mount is in Surface Mount.The logic switch is a member of the family of LVC/LCX/Z.As a result, signal multiplexer provides 1 bits.Vsup (maximum supply voltage) should be kept as 5.5V to prevent unnecessary failures.This turn signal switch has 3 outputs designed for its operation.Decoder/Drivers is the classification for this the digital switch ic.Without any external influences, it consumes 10μA current of multiplexer ic at all times.In this multiplexer, there is a total of 2 inputs.According to TR, the switches is packaged.Normally, the digitalswitch consists of 1 circuits.
SN74LVC1G29DCUR Features
Supplied in the 8-VFSOP (0.091, 2.30mm Width) package
Adopting a supply type of Single
SN74LVC1G29DCUR Applications
There are a lot of Texas Instruments SN74LVC1G29DCUR Signal Switches / Multiplexers / Decoders applications.
- Data collection system
- Steel plants
- Image transmission
- Data bus control
- Paper plants
- CPU memory location identification
- VGA
- Frequency multiplexing system
- Small scale TV wall
- Microprocessor memory systems
