Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 4 days ago) |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
SOT-563, SOT-666 |
Number of Pins |
6 |
Weight |
2.806603mg |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
6 |
ECCN Code |
EAR99 |
Resistance |
15Ohm |
Subcategory |
Multiplexers or Switches |
Technology |
CMOS |
Terminal Position |
DUAL |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
2.3V |
Terminal Pitch |
0.5mm |
Base Part Number |
74LVC1G3157 |
Pin Count |
6 |
Number of Outputs |
2 |
Polarity |
Non-Inverting |
Number of Channels |
1 |
Number of Circuits |
1 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
1.65V |
Operating Supply Current |
1μA |
Nominal Supply Current |
1μA |
Max Supply Current |
10μA |
Propagation Delay |
300 ps |
Turn On Delay Time |
5.7 ns |
Supply Type |
Single |
Bandwidth |
300MHz |
Turn-Off Delay Time |
3.8 ns |
-3db Bandwidth |
340MHz |
On-State Resistance (Max) |
15Ohm |
High Level Output Current |
128mA |
Low Level Output Current |
128mA |
Multiplexer/Demultiplexer Circuit |
2:1 |
Off-state Isolation-Nom |
57 dB |
Channel Capacitance (CS(off), CD(off)) |
5.2pF |
On-state Resistance Match-Nom |
0.1Ohm |
Switch Circuit |
SPDT |
Switch Time (Ton, Toff) (Max) |
5.7ns, 3.8ns |
Charge Injection |
7pC |
Channel-to-Channel Matching (ΔRon) |
100m Ω |
Crosstalk |
-54dB @ 10MHz |
Switching |
BREAK-BEFORE-MAKE |
Switch-off Time-Max |
7.5ns |
Voltage - Supply, Single (V+) |
1.65V~5.5V |
Normal Position |
NC |
Height |
600μm |
Length |
1.6mm |
Width |
1.2mm |
Thickness |
550μm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74LVC1G3157DRLR Overview
Packed in SOT-563, SOT-666, the electronic component is convenient for shipping overseas. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. This analog switch is mounted in Surface Mount. Multiplexer and demultiplexer circuits have a number 2:1. Around -40°C~85°C TA is the extended operating temperature. Total terminations are 6. As a result of its 1 channels, this electronic component provides high-quality output. Powered by a 2.3V voltage supply, the electrical part should be switched on and run. The electronic part body is injected with 6 pins. Circuits based on SPDT switching are used to construct these analog switch ics. The multiplexer consists of 1 circuits. Try searching with 74LVC1G3157 if you're looking for variants. This digital multiplexer has 15Ohm internal resistance. For functions related to 6 pins, please refer to the datasheets. A analogue multiplexer of this type is a Multiplexers or Switches. It is generally not recommended to supply a voltage higher than 5.5V to the switch device in normal circumstances. Single supply type digital switch with a low cost. It is recommended that the electrical component receives a voltage of 1.65V. An operating current of 1μA would be sufficient for this switch device. An analogue multiplexer drains from a single voltage supply at 1.65V~5.5V. The analogue multiplexer may be damaged if voltage is greater than 10μA. It is possible to transfer data over a 300MHz-bandwidth. Multiplexer ics with 2 outputs are available.
SN74LVC1G3157DRLR Features
1 Channels
Switch Circuit: SPDT
1μA Supply Current
-3db Bandwidth: 340MHz
Bandwidth: 300MHz
SN74LVC1G3157DRLR Applications
There are a lot of Texas Instruments SN74LVC1G3157DRLR Analog Switches & Multiplexers ICs applications.
- Audio/video switches
- ATM
- Audio and video routing
- Routers
- Public switching systems
- Communications systems
- Relay replacements
- Automatic test equipment
- 65 V DACs
- Cable Modem