SN74LVC1G3157DRY2
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-UFDFN |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 15Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexers or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74LVC1G3157 |
| Output | COMMON OUTPUT |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 1μA |
| Propagation Delay | 300 ps |
| Supply Type | Single |
| Bandwidth | 340MHz |
| Supply Current-Max (Isup) | 0.035mA |
| -3db Bandwidth | 340MHz |
| On-State Resistance (Max) | 15Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Current - Leakage (IS(off)) (Max) | 1μA |
| Channel Capacitance (CS(off), CD(off)) | 5.2pF |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 5.7ns, 3.8ns |
| Charge Injection | 7pC |
| Channel-to-Channel Matching (ΔRon) | 100m Ω |
| Crosstalk | -54dB @ 10MHz |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 1.65V~5.5V |
| Normal Position | NC |
| Height | 600μm |
| Length | 1.45mm |
| Width | 1mm |
| Thickness | 500μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVC1G3157DRY2 Overview
This electronic part is conveniently packaged in 6-UFDFN, making it easy to ship abroad. High reliability is ensured by the advanced packaging method Tape & Reel (TR). Multiplexers like this are mounted in the Surface Mount position. There is 2:1 ratio between the number of multiplexers and demultiplexers. An extended operating temperature of -40°C~85°C TA degrees Celsius. Total terminations are 6. This electronic part offers high-quality output due to its 1 channels. A SPDT switching circuit is used to build these analog multiplexers. Try searching for the analog switch ic with 74LVC1G3157 if you are looking for variants. As far as internal resistance is concerned, it has 15Ohm. The functions of 6 pins can be found in the datasheets. A analogue multiplexer of this type is a Multiplexers or Switches. A voltage higher than 5.5V should not normally be supplied to the switches. Digital switch that provides Single power at a cost-effective price. There should be 1.65V voltage fed to the electrical part below 1.65V. For this multiplexer to operate, 1μA current would be sufficient. An analogue multiplexer drains from a single voltage supply at 1.65V~5.5V. The outputs of this digital multiplexer are COMMON OUTPUT in number. 340MHz-bandwidths can be used to transfer data between multiplexers.
SN74LVC1G3157DRY2 Features
1 Channels
Switch Circuit: SPDT
1μA Supply Current
-3db Bandwidth: 340MHz
Bandwidth: 340MHz
SN74LVC1G3157DRY2 Applications
There are a lot of Texas Instruments SN74LVC1G3157DRY2 Analog Switches & Multiplexers ICs applications.
- SONET
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Imaging
- Isolation
- Private Branch Exchange (PBX)
- USB 1.1 signal switching circuits
- Cable Modem
- SDH
- Communication systems
- Fiber In The Loop (FITL)
