Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 week ago) |
Contact Plating |
Copper, Silver, Tin |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
6-XFBGA, DSBGA |
Number of Pins |
6 |
Weight |
1.700971mg |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e1 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
6 |
ECCN Code |
EAR99 |
Resistance |
15Ohm |
Terminal Finish |
Tin/Silver/Copper (Sn/Ag/Cu) |
Subcategory |
Multiplexers or Switches |
Technology |
CMOS |
Terminal Position |
BOTTOM |
Terminal Form |
BALL |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
2.3V |
Terminal Pitch |
0.5mm |
Base Part Number |
74LVC1G3157 |
Pin Count |
6 |
Number of Outputs |
2 |
Polarity |
Non-Inverting |
Number of Channels |
1 |
Number of Circuits |
1 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
1.65V |
Operating Supply Current |
1μA |
Nominal Supply Current |
1μA |
Max Supply Current |
10μA |
Propagation Delay |
300 ps |
Turn On Delay Time |
5.7 ns |
Supply Type |
Single |
Bandwidth |
300MHz |
Turn-Off Delay Time |
3.8 ns |
-3db Bandwidth |
340MHz |
On-State Resistance (Max) |
15Ohm |
High Level Output Current |
128mA |
Low Level Output Current |
128mA |
Multiplexer/Demultiplexer Circuit |
2:1 |
Off-state Isolation-Nom |
57 dB |
Channel Capacitance (CS(off), CD(off)) |
5.2pF |
On-state Resistance Match-Nom |
0.1Ohm |
Switch Circuit |
SPDT |
Switch Time (Ton, Toff) (Max) |
5.7ns, 3.8ns |
Charge Injection |
7pC |
Channel-to-Channel Matching (ΔRon) |
100m Ω |
Crosstalk |
-54dB @ 10MHz |
Switching |
BREAK-BEFORE-MAKE |
Switch-off Time-Max |
7.5ns |
Voltage - Supply, Single (V+) |
1.65V~5.5V |
Normal Position |
NC |
Height |
500μm |
Length |
1.5mm |
Width |
900μm |
Thickness |
2mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74LVC1G3157YZPR Overview
Shipping overseas is convenient with the electronic component packed in 6-XFBGA, DSBGA. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. Mounted in Surface Mount is this multiplexer. Multiplexers and demultiplexers have the same number of circuits 2:1. Around -40°C~85°C TA is the extended operating temperature. 6 terminations have been made so far. High-quality output is provided by the electronic component's 1 channels. In the case of a voltage supply of 2.3V volts, the electrical part can be powered up and run. Into the electrical component body are injected 6 pins. Unlike digital switches, these are based on SPDT switching circuits. This multiplexer is composed of 1 circuits. Using the 74LVC1G3157 search parameter, you can discover variants of the switch. This digital multiplexer has 15Ohm internal resistance. To find out what the functions of 6 pins are, please refer to their datasheets. Multiplexers or Switches is a typical switch device. An abnormal situation would be for the switch device to be supplied with a voltage greater than 5.5V. Digital switch that provides Single power at a cost-effective price. 1.65V is the lowest voltage the electrical component should receive. An operating current of 1μA would be sufficient for this switch device. Using a single voltage supply, this switch device consumes 1.65V~5.5V volts. A voltage higher than 10μA may cause damage to the switch multiplexer. 300MHz bandwidths enable data to be transferred. This digital multiplexer has 2 outputs.
SN74LVC1G3157YZPR Features
1 Channels
Switch Circuit: SPDT
1μA Supply Current
-3db Bandwidth: 340MHz
Bandwidth: 300MHz
SN74LVC1G3157YZPR Applications
There are a lot of Texas Instruments SN74LVC1G3157YZPR Analog Switches & Multiplexers ICs applications.
- Sample-and-hold systems
- E1 Network Equipment
- Medical systems
- Battery Powered Systems
- Optical Applications
- Cross Connects
- Audio signal routing
- Audio/video switches
- Frame Relay Equipment
- Data Acquisition Systems