SN74LVC1G373DBVR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Weight | 6.492041mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.95mm |
| Frequency | 150MHz |
| Base Part Number | 74LVC1G373 |
| Pin Count | 6 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 1:1 |
| Polarity | Non-Inverting |
| Power Supplies | 3.3V |
| Number of Channels | 1 |
| Number of Ports | 2 |
| Nominal Supply Current | 10μA |
| Output Current | 32mA |
| Number of Bits | 1 |
| Propagation Delay | 4.5 ns |
| Quiescent Current | 10μA |
| Turn On Delay Time | 1 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 32mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.032 A |
| Control Type | ENABLE LOW/HIGH |
| Number of Input Lines | 1 |
| Count Direction | UNIDIRECTIONAL |
| Translation | N/A |
| Max Junction Temperature (Tj) | 150°C |
| Ambient Temperature Range High | 125°C |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVC1G373DBVR Overview
A package called SOT-23-6 contains it. A Tape & Reel (TR) package is used to package it. The output it is configured with uses Tri-State. The Logic type of this electrical device is D-Type Transparent Latch. Surface Mount is used to mount this electronic part. With a supply voltage of 1.65V~5.5V, it operates. There is -40°C~125°C operating temperature. The 74LVC series of FPGAs is the one this FPGA belongs to. The design of this electronic part is based on 1 bits. As far as this device is concerned, it has no terminations. This type belongs to the 74LVC1G373 family. The device is operated when the supply voltage is set to 1.8V. It is equipped with 6 pin count. There is a device in this electronic family called LVC/LCX/Z. The device has 6 pins. It is mounted according to the Surface Mount method. This device is equipped with 2 ports. The part belongs to the FF/Latches subcategory. The device is powered by 3.3V power supplies. An electronic circuit can be found on 1 input lines. Based on its reliable performance, this device is suitable for TR. It features maximum flexibility in design due to 32mA output current. High efficiency requires a voltage supply of 5V. The quiescent current consumed by it is 10μA because it is unaffected by external factors.
SN74LVC1G373DBVR Features
SOT-23-6 package
74LVC series
1 Bits
74LVC1G373 family
6 pin count
6 pins
3.3V power supplies
SN74LVC1G373DBVR Applications
There are a lot of Texas Instruments SN74LVC1G373DBVR Latches applications.
- Automotive HEV/EV Powertrain
- Synchronous frequency dividers
- Shift Registers
- Programmable binary
- Counter
- Counter control
- Motor Drives
- Parallel Output
- Relay
- Up/down difference counting
