SN74LVC1G373DCKR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Number of Pins | 6 |
| Weight | 2.494758mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Base Part Number | 74LVC1G373 |
| Pin Count | 6 |
| Output Type | Tri-State |
| Operating Supply Voltage | 3.3V |
| Circuit | 1:1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Number of Channels | 1 |
| Load Capacitance | 30pF |
| Number of Ports | 2 |
| Output Current | 32mA |
| Number of Bits | 1 |
| Propagation Delay | 4 ns |
| Quiescent Current | 10μA |
| Turn On Delay Time | 1 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 32mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.032 A |
| Control Type | ENABLE LOW/HIGH |
| Number of Input Lines | 1 |
| Count Direction | UNIDIRECTIONAL |
| Translation | N/A |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVC1G373DCKR Overview
6-TSSOP, SC-88, SOT-363 contains it. Tape & Reel (TR) is the packaging method. It uses Tri-State as its output configuration. This electrical device has Logic type D-Type Transparent Latch. The way in which this electronic part is mounted is Surface Mount. A 1.65V~5.5V voltage supply is required for operation. The temperature at which the machine is operating is -40°C~125°C. There are a number of FPGAs in this series, including this one. With this electronic part, there are 1 bits. This device has been designed with 6 terminations available. The family in which it belongs to is 74LVC1G373. The supply voltage of the device is 1.8V. With 6 pins, it is equipped. This electronic device belongs to the family of LVC/LCX/Z. There are 6 pins on it. This electronic part is mounted in the way of Surface Mount. In this device, there is a total of 2 ports available for use. It belongs to the subcategory of FF/Latches. There is a maximum voltage supply (Vsup) that reaches 5.5V. Electronic circuits are represented by 1 input lines. The reliability of this device makes it well suited to TR. Its 32mA output current allows for maximum design flexibility. Optimal efficiency requires 3.3V as the supply voltage. Without external influences, it consumes 10μA of quiescent current.
SN74LVC1G373DCKR Features
6-TSSOP, SC-88, SOT-363 package
74LVC series
1 Bits
74LVC1G373 family
6 pin count
6 pins
SN74LVC1G373DCKR Applications
There are a lot of Texas Instruments SN74LVC1G373DCKR Latches applications.
- Up/down difference counting
- Shift Registers
- Automotive Cluster
- Phase comparator
- Timers
- Counters
- Sample and hold register
- Flip-flops
- Decade counting 7-segment decimal display
- Synchronous frequency dividers
