Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 4 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
SC-74A, SOT-753 |
Number of Pins |
5 |
Weight |
11.198062mg |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
5 |
ECCN Code |
EAR99 |
Resistance |
10Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
1.8V |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
74LVC1G66 |
Pin Count |
5 |
Qualification Status |
Not Qualified |
Number of Channels |
1 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
1.65V |
Analog IC - Other Type |
SPDT |
Operating Supply Current |
10μA |
Nominal Supply Current |
1μA |
Max Supply Current |
10μA |
Throw Configuration |
SPST |
Propagation Delay |
600 ps |
Turn On Delay Time |
4.2 ns |
Supply Type |
Single |
Bandwidth |
300MHz |
Turn-Off Delay Time |
5 ns |
-3db Bandwidth |
300MHz |
On-State Resistance (Max) |
10Ohm |
Multiplexer/Demultiplexer Circuit |
1:1 |
Off-state Isolation-Nom |
58 dB |
Current - Leakage (IS(off)) (Max) |
100nA |
Channel Capacitance (CS(off), CD(off)) |
6pF |
On-state Resistance Match-Nom |
12Ohm |
Switch Circuit |
SPST - NO |
Switch Time (Ton, Toff) (Max) |
4.2ns, 5ns |
Switching |
BREAK-BEFORE-MAKE |
Voltage - Supply, Single (V+) |
1.65V~5.5V |
Normal Position |
NC |
Height |
1.45mm |
Length |
2.9mm |
Width |
1.6mm |
Thickness |
1.2mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74LVC1G66DBVTG4 Overview
The electronic part can be shipped overseas conveniently because it is packaged in SC-74A, SOT-753. High reliability is provided by advanced packaging method Tape & Reel (TR). It is mounted in the position Surface Mount. 1:1 is the ratio between multiplexers and demultiplexers. Operating temperature around -40°C~85°C TA extended. In total, there have been 5 terminations. The electronic part provides high-quality output because it has 1 channels. When the electronic component is given a voltage of 1.8V, it should be turned on and run. As part of the design of the 5 series, this electronic part has been incorporated into the system. On the other hand, analog switches can be constructed using SPST - NO switching circuits. Use 74LVC1G66 to search for variants of the digital switches. The internal resistance of this digital multiplexer is 10Ohm. Datasheets for 5 pin functions are available upon request. Users shouldn't supply more than 5.5V voltage to the switch device. Analogue multiplexer with a Single supply type that is cost-effective. It is recommended that the electrical component receives a voltage of 1.65V. This multiplexer would work with 10μA current. This analog switch requires a voltage of 1.65V~5.5V to drain from a single voltage supply. Putting voltage greater than 10μA on the multiplexer may cause damage. It is integrated with a SPDT analog IC. The data can be transferred over a wide range of bandwidths, called 300MHz bandwidths.
SN74LVC1G66DBVTG4 Features
1 Channels
Switch Circuit: SPST - NO
10μA Supply Current
-3db Bandwidth: 300MHz
Bandwidth: 300MHz
SN74LVC1G66DBVTG4 Applications
There are a lot of Texas Instruments SN74LVC1G66DBVTG4 Analog Switches & Multiplexers ICs applications.
- Industrial
- Battery Powered Systems
- Remote wireless modules
- Sample hold systems
- Sample-and-hold systems
- Central office
- RGB switches
- Public switching systems
- Transmit
- Frame Relay Equipment