SN74LVC1G66DCKJ
| Parameters | |
|---|---|
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Resistance | 10Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | 74LVC1G66 |
| Power Supplies | 3.3V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 10μA |
| Nominal Supply Current | 1μA |
| Max Supply Current | 10μA |
| Throw Configuration | SPST |
| Turn On Delay Time | 4.2 ns |
| Number of Inputs | 1 |
| Supply Type | Single |
| Bandwidth | 1.25MHz |
| Turn-Off Delay Time | 5 ns |
| -3db Bandwidth | 300MHz |
| On-State Resistance (Max) | 10Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 6pF |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 4.2ns, 5ns |
| Voltage - Supply, Single (V+) | 1.65V~5.5V |
| Normal Position | NO |
| Length | 2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
SN74LVC1G66DCKJ Overview
Presented in 5-TSSOP, SC-70-5, SOT-353, this electrical component is convenient for overseas shipping. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. In Surface Mount, this analog switch is mounted. The ratio between the number of multiplexer and demultiplexer circuits is 1:1. Around -40°C~85°C TA is the extended operating temperature. Total terminations are 5. It is safe to turn on and run the electronic component with a 3.3V voltage supply. SPST - NO switching circuits are used in these analog switch ics. Use 74LVC1G66 to search for variants of the digital switches. Internally, this switch multiplexer has a resistance of 10Ohm. Please refer to the datasheets for 5 pins functions. It is a typical Multiplexer or Switches analog multiplexer. An abnormal situation would be for the switch device to be supplied with a voltage greater than 5.5V. The analog switch ic is of the Single supply type and is cost-effective. In order for the electronic part to function properly, the lowest voltage should be 1.65V. For this multiplexer to operate, 10μA current would be sufficient. Analogue multiplexers require a 1.65V~5.5V voltage to drain from a single voltage supply. A voltage higher than 10μA may cause damage to the switch multiplexer. Among the inputs that can be operated are the 1 inputs. It is possible to transfer data over a 1.25MHz-bandwidth.
SN74LVC1G66DCKJ Features
Switch Circuit: SPST - NO
10μA Supply Current
-3db Bandwidth: 300MHz
Bandwidth: 1.25MHz
SN74LVC1G66DCKJ Applications
There are a lot of Texas Instruments SN74LVC1G66DCKJ Analog Switches & Multiplexers ICs applications.
- Remote wireless modules
- Audio/video switches
- High reliability control systems
- Cell phones
- PBXs
- DVD-R
- MP3 players
- Precision instrumentation
- Access Concentrators
- Automatic test equipment
